产品特点 FEATURES

1 Modular design with 6 slots (1200W max total power), each slot supports up to 240W single/dual output modules (NMS-240/NMD-240)

2 Wide input voltage range: AC 90~264V or DC120~370V, suitable for global use

3 Multiple output voltage options:5V,12V,24V,48V (adjustable ranges available, e.g.,5V:3-6V,12V:6-15V)

4 Complies with multiple safety standards: Medical (ANSI/AAMI ES60601-1 Ed3.1) and ITE (UL62368-1, EN62368-1 etc.) standards

5 Advanced functions: Remote ON/OFF control (global/local), remote sense, output voltage/current programming, current sharing for parallel operation, DC OK signal, over-temperature alarm (T-Alarm)

6 Comprehensive protection: Overload, over-voltage, over-temperature protection; constant current limiting for overload

7 Compact size: Front-end dimensions 250×127×41mm, lightweight (~2kg)

8 Auxiliary power output:5V/2A (front-end) and5V/10mA (modules) for control circuits

使用场景 APPLICATIONS

1 Industrial automation systems: Powering PLCs, DCS modules, sensors and actuators

2 Medical equipment: Suitable for diagnostic devices, patient monitoring systems (compliant with medical safety standards)

3 Test and measurement instruments: Stable, adjustable power for lab equipment, signal generators

4 Communication systems: Powering base station modules, network switches

5 Data center and server racks: Modular power distribution for server blades

6 Industrial control panels: Flexible power for control components

7 Modular electronic systems: Customizable power for multi-voltage devices

注意事项 PRECAUTIONS

1 Derating requirement: Reduce output power/current at temps above50°C; for output <12V and temps -15~-30°C, derate to90% rated current

2 Mounting: Use M4 screws with7~10 Kgf-cm torque; ensure correct air flow direction

3 Global ON/OFF: Assemble shorting connector (RC1 to GND-P) if function not used

4 Remote sense: Use twisted pairs for +S/-S lines to minimize noise

5 Parallel operation: Connect CS pins of modules; ensure voltage difference <0.2V; do not use PC function when parallel

6 Blank slots: Install BLANK-NMS240 accessory in unused slots

7 Protection: Re-power on to recover from over-voltage; wait for temp drop for over-temperature

8 Wiring: Follow pin assignments strictly; use20~26AWG wire for control pins and10mm strip length for output terminals

NMP1K2-EEEEEC-01-PDF数据手册-参考资料