产品特点 FEATURES

Brand: MW (明纬), Model: NMP1K2-EEECHH-00, Series: NMP

1 Type: 1200W modular power supply with 6 slots

2 Input specs: 90~264VAC /120~370VDC voltage range, 47~63Hz frequency range, PF>0.95 (230VAC full load), PF>0.98 (115VAC full load), efficiency up to 91% (H/K modules at 24V/48V full load)

3 Output modules: Supports NMS-240 (single output:5V/36A,12V/20A,24V/10A,48V/5A) and NMD-240 (dual output, max 240W per module)

4 Safety approvals: Complies with ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1, EN62368-1, IEC60601-1, IEC62368-1, EAC TP TC004

5 Protection functions: Over temperature (shutdown, auto recover), over voltage (shutdown, repower to recover), overload (constant current limiting), over current

6 Additional functions: Remote control, alarm signal (TTL level for over temp), auxiliary power (5V@2A for NMP1K2), remote sense (compensates up to 0.5V voltage drop), current sharing (for parallel modules), DC OK signal (indicates output status)

7 EMC compliance: EN55032 Class B (emission), EN61000 series (immunity: ESD level4, RF field level3, EFT/burst level3, surge level4 etc.)

8 Mechanical specs: Dimensions 250*127*41mm (L*W*H), weight ~2kg, packing:6pcs/13kg/0.88CUFT

使用场景 APPLICATIONS

1 Industrial automation systems: Powering multiple control components (PLCs, sensors, actuators) with different voltage requirements

2 Medical equipment: Suitable for devices needing medical safety approvals (e.g., diagnostic instruments, patient monitors)

3 Test and measurement instruments: Providing adjustable DC outputs for testing various electronic components

4 Telecom and data center equipment: Modular power supply for routers, switches, and server peripherals

5 Industrial control panels: Powering multiple modules in a compact space

6 Robotics systems: Supplying power to different subsystems (motors, controllers, sensors)

7 Laboratory equipment: Flexible power solution for R&D and experimental setups

注意事项 PRECAUTIONS

1 Installation: Use M4 screws with mounting torque of7~10 Kgf-cm, max penetration depth4mm; ensure proper grounding

2 Global ON/OFF control: If not using external control, assemble the shorting connector (RC1 to GND-P) to enable output

3 Parallel operation (NMS-240 modules):

4 Connect CS pins of all modules together

5 Ensure output voltage difference between modules <0.2V

6 Total output current ≤ sum of rated currents of modules, total power ≤1200W

7 Max6 modules for NMP1K2; use short and large-diameter wiring

8 Remote control must turn all parallel modules on/off simultaneously; do not use PC (current programming) function in parallel

9 Derating: For output voltage <12V and ambient temperature -15~-30°C, derate output current to90% of rated value

10 Remote sense: Connect +S/-S pins to load terminals to compensate for voltage drop on wiring (up to0.5V)

11 Over temperature protection: When internal temp exceeds limit, output shuts down and auto recovers after cooling; T-Alarm signal (high level) indicates over temp

12 Local ON/OFF: For NMS-240, open RC2 to GND to turn on output, short to turn off; for NMD-240, open RC2/RC3 to GND1/GND2 to turn on V1/V2, short to turn off

13 Protection recovery: Over voltage protection requires repowering to recover; over temp recovers automatically when cool

NMP1K2-EEECHH-00-PDF数据手册-参考资料