产品特点 FEATURES

Modular design with 6 slots, supporting up to 1200W total output power (NMP1K2 model)

Wide input voltage range:90~264VAC/120~370VDC, compatible with global power grids

High power factor:PF>0.95 at 230VAC full load, PF>0.98 at115VAC full load, reducing grid interference

Compliance with multiple safety standards:Medical (EN60601-1 Ed3.1,2x MOPP isolation) and ITE (EN62368-1), suitable for medical and industrial applications

Multiple output module options:Supports5V(36A),12V(20A),24V(10A),48V(5A) single-output modules (NMS-240 series) and dual-output modules (NMD-240 series)

Remote control functions:Global ON/OFF via RC1 pin, local ON/OFF for each module via RC2/RC3 pins

Current sharing capability:Allows parallel operation of multiple modules to distribute load evenly

Comprehensive protection mechanisms:Over-temperature (shutdown auto-recover), overload (constant current limiting), over-voltage (shutdown re-power recover)

High efficiency:Up to91% at full load with24V/48V modules

Auxiliary power output:5V/2A for NMP1K2, powering control circuits

DC OK signal:TTL level signal indicating output status for system monitoring

使用场景 APPLICATIONS

Medical equipment:Diagnostic devices (ultrasound, blood analyzers), patient monitors, medical imaging systems

Industrial automation:PLCs, DCS systems, control panels, servo drives, sensors

Test and measurement instruments:Oscilloscopes, signal generators, power analyzers

Communication systems:Network routers, switches, base stations, fiber optic transceivers

Data centers:Server racks, storage devices, UPS backup systems

Laboratory equipment:Research instruments, electronic test benches

Applications needing modular, reliable power with multiple outputs and high safety compliance

注意事项 PRECAUTIONS

Installation:Ensure proper ventilation, use recommended M4 screws with7~10 Kgf-cm torque, avoid blocking vents

Input voltage:Do not exceed rated range (90-264VAC/120-370VDC)

Output load:Total power ≤1200W; each module load ≤rated current

Parallel operation:Connect CS pins of same voltage modules, max6 slots for NMP1K2; output voltage difference <0.2V

Remote sense:Connect +S/-S pins to load terminals to compensate wiring voltage drop

Temperature derating:Derate output current as per curve if ambient temp exceeds50°C; for <12V output and -15~-30°C, derate to90%

Safety:Follow EN60601-1/EN62368-1 standards; avoid live parts contact

Maintenance:Keep clean, avoid moisture; check loose connections regularly

Remote control:Correct wiring for ON/OFF (open=ON, short=OFF for RC2)

NMP1K2-EECCKK-01-PDF数据手册-参考资料