产品特点 FEATURES

1 Modular design with 6 slots (NMP1K2 model) supporting up to 1200W total output power

2 Wide input voltage range:90~264VAC/120~370VDC; frequency range:47~63Hz

3 High power factor:PF>0.95@230VAC,PF>0.98@115VAC(full load)

4 High efficiency up to 91%(full load with H/K module at 24V/48V)

5 Complies with multiple safety standards:ANSI/AAMI ES60601-1 Ed3.1,UL62368-1,IEC60601-1 Ed3.1,IEC62368-1,EAC TP TC004

6 Supports single output(5V@36A/12V@20A/24V@10A/48V@5A) and dual output(30V@5A each) modules(240W per module)

7 Comprehensive protection:overload(constant current limiting),overvoltage(shut down/re-power to recover),overtemperature(auto recover after cooling)

8 Flexible control functions:global/local ON/OFF,remote sense,output voltage/current programming,current sharing

9 Auxiliary power outputs:5V/2A(front-end),5V/10mA(per module)

10 Compact size:250×127×41mm(L×W×H),lightweight(2kg typ)

使用场景 APPLICATIONS

1 Medical equipment(complying with 2x MOPP isolation requirements)

2 Industrial automation systems needing customizable DC power

3 Test and measurement instruments with multiple voltage/current needs

4 Telecommunications and data centers for modular power distribution

5 Laboratory R&D and prototype testing setups

6 High-reliability applications requiring safety compliance and flexible power solutions

注意事项 PRECAUTIONS

1 Must install shorting connector(RC1 to GND-P) to enable output(no output without it)

2 Remote sense:connect +S/-S to load terminals to compensate voltage drop(max 0.5V)

3 Parallel operation:connect CS pins of modules;output voltage difference<0.2V;total current≤sum of rated currents(≤1200W total);use short/large wires;remote control turns all modules on/off simultaneously;do not use PC function

4 Derating:for output voltage<12V and temp-15~-30°C,derate current to90% of rated;follow derating curves for temp/input voltage

5 Overload:constant current limiting;overvoltage:shut down(re-power to recover)

6 Local ON/OFF:NMS-240(open RC2 to turn on,short to turn off);NMD-240(open RC2/RC3 to turn on V1/V2,short to turn off)

7 Use appropriate connectors(e.g.,HRS DF11 series for CN32/CN81)

8 Do not exceed module max load(240W) or system total(1200W)

NMP1K2-ECHHHC-08-PDF数据手册-参考资料