产品特点 FEATURES

1 Modular design: 1200W maximum power (6 slots for NMP1K2), supports single-output (NMS-240) and dual-output (NMD-240) modules with multiple voltage options (5V,12V,24V,48V etc.), enabling flexible configuration to meet diverse power needs

2 High performance: Wide input voltage range (90-264VAC / 120-370VDC), 47-63Hz frequency range; high efficiency up to 91% (for H/K modules at nominal 24V/48V full load); power factor >0.95@230VAC full load

3 Safety compliance: Adheres to multiple safety standards including ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, and EAC TP TC004; isolation levels: Primary-Secondary (2x MOPP), Primary-Earth (1x MOPP); leakage current <400uA@264VAC

4 Rich protection functions: Overload protection (constant current limiting or shutdown), overvoltage protection (shutdown, repower to recover), over-temperature protection (shutdown, auto-recover after temperature drop); low line/load regulation (e.g., ±0.2% for 24V/48V modules)

5 Advanced control & monitoring: Supports global/local remote ON/OFF, remote sense (compensates voltage drop up to 0.5V), output voltage/current programming (via PV/PC pins), DC OK signal (TTL level for output status), T-Alarm (over-temperature signal), and current sharing for parallel operation

6 EMC compliance: Meets EN55032 Class B (emission) and EN61000 series (immunity: ESD Level4, RF field Level3, EFT/Burst Level3, Surge Level4 etc.)

7 Compact & durable: Dimensions of 250×127×41mm (L×W×H), weight ~2kg (typ); suitable for industrial environments with robust mechanical design

使用场景 APPLICATIONS

1 Industrial automation: Power supply for PLCs, DCS systems, industrial controllers, and sensor networks requiring multiple output voltages

2 Medical equipment: Suitable for medical devices (e.g., diagnostic instruments, patient monitors) due to compliance with medical safety standards (2x MOPP isolation)

3 Telecom & data centers: Power for telecom switches, routers, server racks, and network devices needing flexible, reliable power solutions

4 Test & measurement: Used in lab equipment, test benches, and calibration tools requiring precise, adjustable output voltages

5 Industrial control systems: Power for motor drives, robotics, and process control systems

6 Other applications: Any scenario needing modular, high-efficiency power with multiple outputs and advanced monitoring capabilities

注意事项 PRECAUTIONS

1 Installation: Use M4 screws (torque 7-10Kgf-cm) for mounting; install BLANK-NMS240 accessories in empty slots; ensure proper grounding and compliance with local electrical codes

2 Operation: Follow derating guidelines (e.g., output current derate to90% when Vo<12V and temp -15~-30°C; adjust load based on ambient temp and input voltage)

3 Parallel operation: For NMS-240 modules, connect CS pins for current balance; max 6 slots (NMP1K2); output voltage difference between parallel modules <0.2V; avoid using PC function in parallel mode; remote control must synchronize all parallel modules

4 Safety: Disconnect power before maintenance; do not exceed rated voltage/current/power; use only Meanwell-approved accessories

5 Other: Install the shorting connector (RC1 to GND-P) if global ON/OFF control is not used; use twisted pairs for remote sense lines; for dual-output modules, local ON/OFF controls each output independently

NMP1K2-ECCKHH-00-PDF数据手册-参考资料