产品特点 FEATURES

1 Brand: MW (明纬), Model: NMP1K2-ECCHHH-04

2 Modular design with 6 slots, supporting up to 1200W total output power

3 Compliance with medical (2x MOPP between primary and secondary) and ITE safety standards

4 Wide input voltage range: 90~264VAC or 120~370VDC

5 High efficiency up to 91% (for H/K modules at nominal 24V/48V full load)

6 Multiple protection functions: overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (automatic recovery after cooling)

7 Supports remote control (ON/OFF via RC pins) and alarm signals (DC OK, T-Alarm)

8 Auxiliary power output: 5V/2A (for NMP1K2)

9 Current sharing capability for parallel operation of modules

10 EMC compliance with EN55032, EN61000 series standards

11 Compact dimensions: 250*127*41mm (L*W*H)

12 Supports output voltage programming (PV) and current programming (PC) for individual modules

13 Remote sense function to compensate for voltage drop on load wiring

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices, patient monitors, and other medical instruments requiring reliable, compliant power

2 Industrial automation: PLC systems, sensors, control panels, and industrial robots

3 Test and measurement: Laboratory instruments, signal generators, and testing equipment

4 Telecom and data centers: Network devices, server racks, and communication systems

5 Other applications: Any scenario needing flexible power configurations with multiple output voltages and reliable performance

注意事项 PRECAUTIONS

1 Ensure the shorting connector is properly installed for global ON/OFF control as specified in the manual

2 Follow derating guidelines: For output voltages <12V and ambient temp between -15°C and -30°C, reduce output current to 90% of rated value

3 Use twisted pairs for remote sense lines (+S/-S) to minimize electromagnetic interference

4 When operating modules in parallel: Connect CS pins of all modules, ensure output voltage difference <0.2V, do not exceed total output power (1200W), and avoid using PC function

5 Do not exceed the maximum mounting torque: 12Kgf-cm for AC terminal,7-10 Kgf-cm for mounting screws

6 Use compatible connectors (e.g., HRS DF11 series) for control and output terminals

7 Keep the device in a well-ventilated environment to prevent overheating

8 Follow safety standards and local regulations during installation and operation

9 For blank slots, use BLANK-NMS240 accessories to maintain EMC performance

NMP1K2-ECCHHH-04-PDF数据手册-参考资料