产品特点 FEATURES

1 Modular power supply with 6 slots (NMP1K2 series), supporting up to 1200W total output power.

2 Wide input voltage range:90~264VAC or 120~370VDC, suitable for global applications.

3 High efficiency up to 91% (typical at full load with H/K modules at 24V/48V), reducing energy loss.

4 Compliance with multiple safety standards:ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, EN62368-1, IEC60601-1 Ed3.1, IEC62368-1, EAC TP TC004, ensuring reliable and safe operation.

5 Flexible output configuration:Supports multiple modules (e.g.,12V@20A,24V@10A) with adjustable voltage ranges (e.g.,12V module:6~15V,24V module:15~30V).

6 Rich protection functions:Overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (shut down and auto-recover when cool), ensuring device safety.

7 Remote monitoring and control:DC OK signal (TTL level indicating output status), remote sense (compensates up to 0.5V voltage drop), current sharing (for parallel operation), remote ON/OFF (global and local control).

8 Auxiliary power output:5V@2A (NMP1K2) for external control circuits.

9 High power factor:PF>0.95 at 230VAC full load, reducing grid interference.

使用场景 APPLICATIONS

1 Industrial automation systems:Powering PLCs, sensors, actuators requiring multiple voltage levels.

2 Medical equipment:Compliance with medical safety standards makes it suitable for diagnostic devices, patient monitors, and laboratory instruments.

3 Test and measurement devices:Providing stable, adjustable power for electronic component testing.

4 Telecommunications:Powering routers, switches, and communication modules in data centers or base stations.

5 Industrial control systems:Supporting robotics, CNC machines, and automated production lines.

6 Data centers:Modular power supply for server racks requiring flexible power distribution.

7 Laboratory research:Flexible output configurations for prototype development and experimental setups.

注意事项 PRECAUTIONS

1 Installation:Ensure the shorting connector (RC1 to GND-P) is properly installed; otherwise, the unit will have no output. Blank slots must be filled with BLANK-NMS240 to maintain safety and airflow.

2 Parallel operation:When modules are in parallel, connect CS pins to balance current; output voltage difference among modules should be <0.2V; total power should not exceed 1200W; do not use PC (output current programming) function.

3 Derating:For output voltage <12V and ambient temperature between -15°C and -30°C, derate output current to 90% of rated value.

4 Remote sense:Use twisted pairs for sense lines to minimize interference; can compensate for up to 0.5V voltage drop on load wiring.

5 Temperature management:Monitor T-Alarm signal (high = overtemp); ensure proper airflow as per mechanical specifications.

6 Mounting:Use recommended M4 screws with torque7~10 Kgf-cm; follow airflow direction to prevent overheating.

7 Control:Global ON/OFF (RC1 to GND-P) and local ON/OFF (RC2 to GND for modules) must be correctly configured per the function manual.

NMP1K2-E#CEHC-00-PDF数据手册-参考资料