产品特点 FEATURES

1 Modular power supply with 6 slots, supporting up to 1200W total output power

2 Wide input voltage range: 90~264VAC (47~63Hz) or 120~370VDC, adapting to global power grids

3 Complies with medical safety standards (2x MOPP between primary and secondary) and ITE standards (ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1)

4 Supports multiple output modules: Single output (5V@36A,12V@20A,24V@10A,48V@5A) and dual output (each up to 30V@5A), each module up to 240W

5 Built-in protection functions: Overload (constant current limiting), overvoltage (shut down and re-power to recover), over-temperature (automatic recovery after cooling)

6 Advanced control features: Remote ON/OFF (global and local), remote sense (compensates up to 0.5V voltage drop), output voltage/current programming (PV/PC), TTL-level DC OK and over-temperature alarm signals

7 High efficiency (up to 91% for 24V/48V modules at full load) and high power factor (PF>0.95 at 230VAC full load)

8 Auxiliary power outputs: 5V@2A (front-end) and 5V@10mA (per module)

9 Compact size: 250×127×41mm (L×W×H), easy to integrate into equipment enclosures

10 Current sharing capability for parallel operation of modules, ensuring balanced load distribution

使用场景 APPLICATIONS

1 Medical equipment: Patient monitors, diagnostic instruments, laboratory analyzers (compliant with medical safety standards)

2 Industrial automation: PLC systems, motor drives, industrial control panels, robotic arms

3 Communication infrastructure: Network switches, routers, base stations, data communication devices

4 Test and measurement: Electronic test instruments, calibration equipment, laboratory setups

5 Data centers: Server racks, storage systems, power distribution units (PDUs)

6 Industrial IoT: Edge computing devices, sensor networks, industrial communication modules

7 Broadcast and media: Professional audio/video equipment, broadcast transmitters

8 Other applications: Industrial control systems, embedded systems requiring stable and modular power supply

注意事项 PRECAUTIONS

1 Installation: Mount using M4 screws with torque 7~10 Kgf-cm; ensure sufficient ventilation (airflow direction as per specs) to prevent overheating

2 Electrical Safety: Follow correct wiring for AC input (L/N/FG) and DC outputs; do not touch live parts when the power supply is energized; use insulated tools for wiring

3 Operational Limits: Do not exceed total output power (1200W max); derate output current at ambient temperatures above 50°C (refer to derating curve); for output voltages below 12V at -15~-30°C, derate current to 90% of rated value

4 Accessory Use: Use only Mean Well-approved accessories (e.g., shorting connectors for global ON/OFF control); do not use non-compliant parts or modify the power supply

5 Maintenance: Do not open the enclosure without authorization (risk of electric shock); regularly inspect cables and housing for damage; keep the unit clean and free of dust

6 Parallel Operation: When paralleling modules, connect CS pins properly; ensure output voltage difference between modules is <0.2V; do not exceed 6 modules in parallel; use short, large-diameter wires for connections

7 Compliance: Adhere to local electrical codes and regulations when installing and operating the power supply

8 Overvoltage Protection: In case of overvoltage, shut down the power supply and re-power to recover; do not continue operation without checking the cause

NMP1K2-CKKHCK-02-PDF数据手册-参考资料