产品特点 FEATURES

1 Modular design with 6 slots (NMP1K2 model) supporting up to 1200W total output power

2 Wide input voltage range: AC 90~264V, DC120~370V; frequency range:47~63Hz

3 High efficiency up to 91% (typical at full load with H/K modules at 24V/48V)

4 Compliance with multiple safety standards: IEC60601-1 Ed3.1, UL62368-1, EN60601-1-2, etc.

5 Multiple protection functions: Overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (shut down and auto-recover when cool)

6 Flexible control options: Global ON/OFF (via RC1 and GND-P) and local ON/OFF (per module via RC2/RC3 and GND)

7 Remote sense function (compensates up to 0.5V voltage drop on load wiring)

8 Output voltage programming (PV pin) and current programming (PC pin) for NMS-240 modules

9 DC OK signal (TTL level) indicating module output status; T-Alarm signal for overtemperature

10 Current sharing capability for parallel operation of NMS-240 modules (balance current between units)

11 Auxiliary power outputs:5V-AUX_P (2A for NMP1K2) and Vcc2 (5V/10mA for NMS-240 modules)

12 Derating options available based on ambient temperature and output voltage (e.g.,90% rated current for Vo <12V at -15~-30°C)

使用场景 APPLICATIONS

1 Industrial automation systems: Powering PLCs, sensors, actuators with configurable outputs

2 Medical equipment: Suitable for devices requiring medical safety compliance (2x MOPP isolation)

3 Test and measurement instruments: Providing stable, adjustable power for electronic device testing

4 Communication systems: Reliable power for routers, switches with multiple output needs

5 Data centers: Parallel operation for redundant power solutions ensuring continuous service

6 Laboratory setups: Flexible power configurations for R&D projects needing various voltage/current combinations

注意事项 PRECAUTIONS

1 Mounting: Follow recommended screw sizes (M4 for front-end, M3.5 for modules) and torque specs (12Kgf-cm for AC terminal,10Kgf-cm for DC terminal)

2 Global ON/OFF: Use the shorting connector (RC1 to GND-P) if not utilizing the global control function

3 Derating: Reduce output current to90% rated value when Vo <12V and ambient temp is -15~-30°C

4 Parallel operation: Connect CS pins, ensure output voltage difference <0.2V between modules, total power ≤1200W; do not use PC function in parallel mode

5 Remote sense: Use twisted pairs for +S/-S lines to minimize noise

6 Control logic: Global ON (short RC1 to GND-P), local ON (open RC2/RC3 to GND)

7 Wiring: Use appropriate wire sizes/lengths for parallel connections to avoid voltage drops

8 Refer to official manual for detailed wiring and function setup

NMP1K2-CKCCKC-00-PDF数据手册-参考资料