产品特点 FEATURES

1 Modular power supply with 6-slot design (NMP1K2), supporting up to 1200W total output power

2 Compatible with single-output (NMS-240:5V/12V/24V/48V) and dual-output (NMD-240:30V×2) modules, each module up to 240W

3 Wide input voltage range:90~264VAC or 120~370VDC; frequency range:47~63Hz

4 High power factor:PF>0.95@230VAC full load, PF>0.98@115VAC full load

5 High efficiency:Up to 91% (typ) at full load with H/K modules (24V/48V)

6 Complies with multiple safety standards:ITE (UL62368-1,EN62368-1) and medical (ANSI/AAMI ES60601-1 Ed3.1,TUV EN60601-1 Ed3.1) with 2x MOPP isolation

7 Rich functional features:Remote sense (compensates up to 0.5V wiring drop), output voltage/current programming (PV/PC pins), DC OK signal (TTL level), current sharing (parallel operation), global/local ON/OFF control

8 Robust protection:Over-temperature, over-voltage, over-load, constant current limiting protection

9 Operating temperature range:-30~+70°C (with derating); vibration resistance:10~500Hz,2G

10 Auxiliary power output:5V/2A (NMP1K2) for external control circuits

使用场景 APPLICATIONS

1 Industrial automation:Powering PLCs, sensors, actuators, and automated production lines

2 Medical devices:Suitable for diagnostic equipment, patient monitors, and lab instruments (meets medical safety standards)

3 Test & measurement:Providing stable, adjustable power for oscilloscopes, signal generators, and prototype testing

4 Telecommunication:Powering routers, switches, and base station equipment

5 Renewable energy systems:Integrating with solar/wind power setups via DC input

6 LED lighting:Supporting high-power LED arrays with precise voltage/current control

7 Laboratory R&D:Flexible power supply for experimental setups and component testing

注意事项 PRECAUTIONS

1 Mounting:Use M4 screws with torque 7~10 Kgf-cm; follow the air flow direction indicated in the spec sheet

2 Shorting connector:Assemble the included shorting connector (RC1 to GND-P) for the power supply to output

3 Derating guidelines:For output voltage <12V and ambient temp -15~-30°C, derate current to 90% of rated; follow derating curves for temp/voltage variations

4 Parallel operation:Max 6 modules for NMP1K2; connect CS pins for current balance; total power not exceeding 1200W

5 Remote control:Global ON/OFF (RC1 to GND-P: short=ON, open=OFF); local ON/OFF (RC2/RC3 to GND: open=ON)

6 DC OK signal:TTL level (4.5~5.5V=ON,0~0.5V=OFF) with max sourcing current 10mA

7 Over temp alarm:T-Alarm signal (TTL level:high=over temp, low=normal) with max sourcing current 10mA

8 Safety:Ensure proper grounding; avoid overloading modules beyond 240W

9 Maintenance:Clean dust regularly; replace modules only with original MW parts

NMP1K2-CKCCHE-00-PDF数据手册-参考资料