1 Modular design with 6 slots for output modules, supporting up to 1200W total power

2 Wide input voltage range:90~264VAC /120~370VDC, suitable for global applications

3 High efficiency up to 91% (full load with H/K modules at 24V/48V nominal)

4 Compliance with medical (2x MOPP between primary and secondary) and ITE safety standards

5 Supports multiple output modules: single output (5V/36A,12V/20A,24V/10A,48V/5A) and dual output (30V/5A each)

6 Remote control functions: global/local ON/OFF, remote sense (compensates up to 0.5V wiring drop)

7 Advanced protection: over-temperature (auto-recover), overload (constant current limiting), over-voltage (shut down, re-power to recover)

8 Current sharing capability for parallel operation of modules (up to 6 slots for NMP1K2)

9 TTL-level signals: DC OK (output status), T-Alarm (over-temperature alert)

10 Auxiliary power output:5V/2A (front-end) and5V/10mA (modules)

1 Industrial automation systems: Powering PLCs, sensors, actuators

2 Medical equipment: Suitable for diagnostic devices, patient monitors (compliant with medical safety standards)

3 Telecom and data communication: Powering routers, switches, base stations

4 Test and measurement instruments: Providing stable power for lab equipment

5 Industrial control systems: Supporting control components in manufacturing lines

6 Data centers: Modular power supply for server racks and network devices

7 Embedded systems: Customizable power solutions for specialized equipment

1 Installation: Follow mounting torque guidelines (M4 screws with7~10 Kgf-cm torque), ensure sufficient ventilation

2 Derating: Reduce output current to90% when output voltage <12V and ambient temp is-15~-30℃; follow derating curves for high temperatures

3 Remote sense: Use +S/-S pins to compensate voltage drop in long wiring (max0.5V)

4 Parallel operation: Connect CS pins of modules, ensure output voltage difference <0.2V; total power not exceed1200W

5 ON/OFF control: Global ON/OFF via RC1 (short to GND-P for ON), local ON/OFF via RC2 (open for ON, short for OFF)

6 Safety: Ensure proper grounding; do not touch live components when powered on

7 Maintenance: Regularly clean dust, avoid blocking air flow

8 Module handling: Use compatible modules (NMS-240/NMD-240) and follow pin assignment for control signals

NMP1K2-CHHHKC-02-PDF数据手册-参考资料