产品特点 FEATURES

1 Modular design with 6 slots, supporting up to 1200W total output (NMP1K2 model)

2 Compatible with NMS-240 (single output, max 240W/module) and NMD-240 (dual output, max combined 240W/module) modules, offering flexible voltage options (5V,12V,24V,48V, etc.)

3 Equipped with multiple protection functions: overload (constant current limiting), overvoltage (shutdown and auto-recover), overtemperature (shutdown and auto-recover)

4 High efficiency (up to 91% typical for 24V/48V modules at nominal voltage)

5 Supports remote control: global ON/OFF (RC1 pin), local ON/OFF (RC2 pin for each module), remote voltage programming (PV pin), current programming (PC pin)

6 Current sharing capability for parallel module operation to balance load

7 Complies with safety standards like EN60601-1 (medical), EN62368-1 (ITE), IEC60950-1

8 Compact mechanical design suitable for industrial enclosures, with specified mounting torque and air flow requirements

使用场景 APPLICATIONS

1 Industrial automation systems (sensors, actuators, controllers requiring multiple voltages)

2 Medical equipment (diagnostic devices, patient monitors compliant with medical safety standards)

3 Test and measurement setups (flexible voltage configurations for various DUTs)

4 Telecom and data communication equipment (scalable power for routers/switches)

5 Industrial control panels and embedded systems (space-efficient modular power)

6 Applications needing scalable power with add/remove module flexibility

注意事项 PRECAUTIONS

1 Installation: Follow specified mounting torque (M4 screws:7-10 Kgf-cm; M3.5 screws:10 Kgf-cm) and air flow direction

2 Temperature Derating: When output voltage <12V and ambient temp is -15°C to -30°C, derate output current to 90% of rated value

3 Remote Control: Ensure shorting connector (RC1 to GND-P) is assembled if not using global ON/OFF control; local ON/OFF for NMS-240: open RC2 for ON, short for OFF

4 Protection: In case of fault (overload/OVP/OTP), resolve issue then re-power to recover

5 Parallel Operation: Connect CS pins for load balance; total power ≤1200W; avoid PC function in parallel mode

6 Compliance: Use in line with applicable safety standards and local regulations

NMP1K2-CHEHCC-05-PDF数据手册-参考资料