产品特点 FEATURES

1 Modular design with 6 slots, supporting up to 1200W total output power

2 Multiple single-output module options:5V/36A,12V/20A,24V/10A,48V/5A (each module up to 240W)

3 Complies with medical safety standards (2x MOPP isolation between primary and secondary) and ITE standards

4 Wide input voltage range:90~264VAC or 120~370VDC, suitable for global use

5 High efficiency (up to 91% at full load with 24V/48V modules) and power factor (>0.95 at 230VAC full load)

6 Comprehensive protection functions:overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (shut down and auto-recover when cool)

7 Support for remote control and monitoring:remote ON/OFF (local/global), DC OK signal (indicates output status), T-alarm (overtemperature warning)

8 Current sharing capability for parallel operation of modules, ensuring balanced load distribution

9 Auxiliary power outputs:5V/2A (front-end) and 5V/10mA (each module) for external control circuits

10 Remote sense function to compensate for voltage drop on load wiring (up to 0.5V)

11 Voltage and current programming options (PV/PC) for flexible output adjustment

使用场景 APPLICATIONS

1 Medical equipment (e.g., diagnostic instruments, patient monitoring systems) requiring medical safety compliance

2 Industrial automation systems (e.g., PLCs, motor drives, control panels) needing multiple stable DC outputs

3 Test and measurement instruments (e.g., oscilloscopes, signal generators) requiring precise voltage/current control

4 Communication equipment (e.g., routers, switches, base stations) needing reliable power supply

5 Data center equipment and server racks (modular design allows easy expansion)

6 Precision electronic devices (e.g., semiconductor testing equipment) needing low ripple and noise

7 Parallel power systems for high-power industrial applications (e.g., industrial heaters, large motors)

注意事项 PRECAUTIONS

1 Ensure proper installation of the shorting connector for global ON/OFF control if not using external control

2 Use twisted pair cables for remote sense (+S/-S) lines to minimize noise

3 Follow specified ranges and GND reference when programming voltage/current (PV/PC)

4 In parallel operation:connect CS pins of all modules, ensure output voltage difference <0.2V between modules, total power ≤1200W

5 Do not use current programming (PC) function when modules are in parallel

6 Adhere to derating guidelines:when output voltage <12V and ambient temp -15~-30°C, derate current to 90%

7 Follow specified mounting torque for terminals (12Kgf-cm for AC input,10Kgf-cm for DC output)

8 Keep air flow direction unobstructed for cooling

9 Disconnect power before making wiring changes or maintenance

NMP1K2-CHCCHK-03-PDF数据手册-参考资料