产品特点 FEATURES

1 Modular design with 6 slots, supporting up to 1200W total output power (NMP1K2 model)

2 Multiple output module options: single output (NMS-240) with 5V/12V/24V/48V and dual output (NMD-240) with adjustable voltage ranges

3 Wide input voltage range: 90~264VAC or 120~370VDC, compatible with global power grids

4 Rich protection functions: overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP)

5 Remote control capabilities: global/local ON/OFF control, remote sense (compensates voltage drop up to 0.5V), output voltage/current programming (PV/PC)

6 DC OK signal (TTL level) to indicate output status, T-Alarm signal for overtemperature warning

7 Support for current sharing in parallel operation (up to 6 modules for NMP1K2), ensuring balanced load distribution

8 Compliance with multiple safety standards: IEC 60601-1 (medical), IEC 62368-1 (ITE), suitable for medical and industrial applications

9 High efficiency and power factor (PF>0.95 at full load 230VAC), reducing energy consumption

使用场景 APPLICATIONS

1 Medical equipment: Suitable for devices requiring medical safety compliance (like diagnostic instruments, patient monitors)

2 Industrial automation: Power supply for PLC systems, motor drives, sensor networks in factory automation

3 Test and measurement: Used in lab equipment (oscilloscopes, signal generators) needing stable and adjustable power

4 Communication systems: Power for routers, switches, base stations in telecom networks

5 Data centers: Modular power solution for server racks, storage systems requiring scalable power

6 Industrial control panels: Power for control circuits, display units, and input/output modules

7 Renewable energy systems: Integration with solar or wind power systems for stable DC power output

注意事项 PRECAUTIONS

1 Before operation, ensure the power supply is properly grounded to prevent electric shock

2 Do not exceed the maximum total output power (1200W for NMP1K2) or module-specific power ratings

3 When using remote sense, use twisted-pair wiring to minimize interference and ensure accurate voltage compensation

4 For parallel operation: Connect CS pins of all modules, ensure output voltage difference <0.2V, and do not exceed the total power limit

5 Operate within the specified temperature range (-30~+70°C), and derate output current as per the derating curve for high temperatures

6 Disconnect AC/DC input power before installing or removing modules to avoid damage

7 Use the provided shorting connector (RC1 to GND-P) if global ON/OFF control is not used; otherwise, the power supply will have no output

8 For medical applications, verify compliance with local medical device regulations and standards

9 Avoid exposing the power supply to moisture, dust, or corrosive environments to ensure long-term reliability

NMP1K2-CE#HKE-00-PDF数据手册-参考资料