产品特点 FEATURES

1 Modular power supply with 6 slots (NMP1K2 model) for flexible output configuration, supporting single output modules (5V@36A,12V@20A,24V@10A,48V@5A) and dual output modules up to 240W each

2 Wide input voltage range:90~264VAC or120~370VDC; frequency range:47~63Hz

3 High power factor (>0.95 at230VAC full load) and high efficiency (up to91% typical with H/K modules at nominal24V/48V full load)

4 Complies with medical (2x MOPP between primary and secondary) and ITE safety standards (ANSI/AAMI ES60601-1,UL62368-1,etc.)

5 Multiple protection functions:Overload (constant current limiting or shut down),overvoltage (shut down,re-power to recover),overtemperature (shut down,auto recover when cool)

6 Rich control functions:Global/local remote on/off,remote sense (compensates up to0.5V voltage drop),output voltage/current programming,DC OK signal (TTL level),current sharing for parallel operation

7 Auxiliary power outputs:5V@2A (front-end) and5V@10mA per module

8 Compact size:Front-end (250*127*41mm L*W*H),module (118.5*37.9*18mm L*W*H)

使用场景 APPLICATIONS

1 Medical equipment:Diagnostic devices (ultrasound,blood analyzers),patient monitoring systems (meets medical safety standards)

2 Industrial automation:PLC systems,industrial control panels,robotics (flexible modular configuration)

3 Test and measurement:Lab equipment,testing instruments (stable output and adjustable parameters)

4 Communication systems:Telecom base stations,network devices (high reliability and multiple voltage outputs)

5 Data centers:Server racks,storage systems (modular design for easy maintenance)

6 ITE applications:Office automation,consumer electronics testing (wide input range and safety compliance)

注意事项 PRECAUTIONS

1 Installation:Use recommended screws (M4 for front-end mounting,M3.5 for output terminals) with specified torque (12Kgf-cm for AC terminal,10Kgf-cm for output terminals);ensure proper grounding

2 Operation:Do not exceed maximum total output power (1200W for NMP1K2);follow derating curves for ambient temperature (e.g.,derate to90% current when output <12V and temp -15~-30°C)

3 Parallel operation:Connect CS pins of modules;output voltage difference <0.2V;use short/large diameter wires;remote control must turn all parallel modules on/off at once;avoid PC function in parallel mode

4 Safety:Disconnect input power before maintenance;do not operate in condensing humidity;no short circuit on output terminals

5 Others:Keep shorting connector (RC1 to GND-P) if global ON/OFF not used;fill blank slots with BLANK-NMS240 accessory

NMP1K2-CCKHKE-00-PDF数据手册-参考资料