产品特点 FEATURES

1 Modular power supply design with 6 slots (NMP1K2 model) supporting up to 1200W total output power

2 Compatible with single-output (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A) and dual-output (NMD-240:30V/5A dual) modules

3 Wide input voltage range:90~264VAC or 120~370VDC, suitable for global applications

4 High efficiency up to 91% (typical at full load with 24V/48V modules)

5 Complies with medical (2x MOPP between primary and secondary) and ITE safety standards

6 Multiple protection functions: overload(constant current limiting), overvoltage(shut down and recover on re-power), overtemperature(automatic recovery after cooling)

7 Supports global/local ON/OFF control, remote sense(compensates up to 0.5V voltage drop), output voltage/current programming(PV/PC pins)

8 Provides DC OK signal(TTL level for module status) and T-Alarm signal(overtemperature alert)

9 Allows parallel operation with current sharing for balanced load distribution

10 Compact dimensions:250*127*41mm(L*W*H), weight about 2kg(typical)

使用场景 APPLICATIONS

1 Industrial automation systems needing multiple stable DC outputs for various components

2 Medical devices requiring 2x MOPP safety standards for patient protection

3 Test and measurement instruments with adjustable voltage/current needs

4 Telecom/data communication equipment for modular power distribution

5 Industrial control panels with flexible power requirements

6 Parallel setups to achieve higher power capacity while maintaining load balance

7 Laboratory environments for customizable power experiments

注意事项 PRECAUTIONS

1 Fit blank slots with BLANK-NMS240 accessory to ensure safety and performance

2 Derate output current to 90% for voltages below12V at -15~-30°C ambient temperature

3 Assemble shorting connector(RC1 to GND-P) if not using global ON/OFF control

4 For parallel operation: connect CS pins, keep voltage difference <0.2V, total power ≤1200W

5 Use remote sense(+S/-S pins) to compensate up to0.5V wiring voltage drop

6 Avoid PC function when modules are in parallel

7 Respond promptly to T-Alarm signal(high level means overtemperature)

8 Follow local ON/OFF logic: open RC2-GND for ON, short for OFF

9 Do not exceed 240W per module load capacity

10 Ensure proper grounding and wiring to meet safety standards

NMP1K2-CCECCC-09-PDF数据手册-参考资料