产品特点 FEATURES

1 Modular 1200W power supply with 6 slots, compatible with NMS-240 (single output, up to 240W) and NMD-240 (dual output, up to 240W combined) modules

2 Wide input voltage range:90~264VAC or 120~370VDC; frequency range:47~63Hz

3 High efficiency up to 91% (for H/K modules at 24V/48V full load)

4 Compliance with multiple safety standards:EN60601-1 (medical,2x MOPP isolation),EN62368-1 (ITE),IEC60950-1

5 Comprehensive protection:Overload (constant current limiting),overvoltage (shutdown,re-power to recover),overtemperature (shutdown,auto-recover after cooling)

6 Flexible control functions:Global/local ON/OFF,remote sense (compensates up to 0.5V wiring drop),output voltage programming (PV),output current programming (PC),DC OK signal (TTL level for output status),temperature alarm (T-Alarm signal)

7 Current sharing capability for parallel operation of modules,ensuring balanced load distribution

8 Auxiliary power outputs:5V/2A (front-end) and5V/10mA (each module)

9 Low ripple and noise:Up to250mVp-p (depending on module)

使用场景 APPLICATIONS

1 Industrial automation:Powering programmable logic controllers (PLCs),industrial sensors,actuators and robotic systems

2 Medical devices:Suitable for patient monitors,diagnostic instruments and lab analyzers (complies with medical safety standards)

3 Telecommunications:Providing stable power for routers,switches,base station equipment and telecom accessories

4 Test and measurement:Used in labs to power electronic test instruments,prototypes and measurement tools

5 Data centers:Modular power solution for server racks,storage systems and network peripherals

6 LED lighting:Powering high-power LED arrays,street lighting and commercial lighting fixtures

注意事项 PRECAUTIONS

1 Installation:Use recommended screws (M4 for front-end,M3.5 for modules) with specified torque (12Kgf-cm for AC terminal,10Kgf-cm for DC terminal);ensure proper grounding

2 Environment:Operate within-30~+70°C;derate current for output <12V at -15~-30°C (to90% of rated)

3 Wiring:Use20~26AWG wires for modules;twist remote sense lines to reduce interference

4 Parallel operation:Connect CS pins of modules;ensure output voltage difference <0.2V;do not use PC function in parallel

5 Control:Install shorting connector (RC1 to GND-P) if not using global ON/OFF;local control via RC2 (open=ON,short=OFF)

6 Protection handling:For overtemperature,wait for cooling before re-powering;overvoltage/overload requires re-power to recover

7 Safety:Avoid touching live parts when powered on;follow application-specific safety regulations

NMP1K2-CCCCE#-10-PDF数据手册-参考资料