产品特点 FEATURES

1 Brand: MW (Meanwell), Model: NMP1K2-C#KEKH-00

2 Type: 1200W modular AC/DC power supply with 6 slots

3 Input: 90~264VAC /120~370VDC, frequency range 47~63Hz

4 Efficiency: Up to 91% (full load with H/K modules at 24V/48V)

5 Power Factor: >0.95 at full load (230VAC), >0.98 at full load (115VAC)

6 Safety Compliance: Meets IEC60601-1 (Ed.3.1, medical grade with 2x MOPP), IEC62368-1, etc.

7 Modular Output: Supports single-output (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A) and dual-output (NMD-240:30V/5A each) modules with adjustable voltage ranges

8 Protection Functions: Overvoltage (OVP), Overcurrent (OCP), Overtemperature (OTP), Overload (OLP), constant current limiting

9 Advanced Functions: Remote sense, global/local remote on/off, current sharing (parallel operation), DC OK signal (TTL level), temperature alarm (T-Alarm), output voltage/current programming (PV/PC), auxiliary power outputs

10 Mechanical Specs: Dimensions 250×127×41mm, weight ~2kg

注意事项 PRECAUTIONS

1 Mounting: Use M4 screws with torque 7~10 Kgf-cm; ensure proper penetration depth

2 Global ON/OFF: Install shorting connector between RC1 (CN32-PIN6) and GND-P if not using external control

3 Remote Sense: Twist +S/-S lines to minimize interference; compensate voltage drop up to 0.5V

4 Parallel Operation: Connect CS pins of modules; ensure output voltage difference <0.2V; total power ≤1200W; avoid PC function in parallel mode

5 Temperature Derating: For output voltage <12V and ambient temp -15~-30°C, derate current to 90% of rated value

6 Local ON/OFF: Open RC2-GND for NMS-240 ON; open RC2-GND1/RC3-GND2 for NMD-240 V1/V2 ON

7 Wiring: Use 20~26AWG wires for control signals; strip length 10mm for output terminals

8 Safety: Follow rated limits; refer to function manual for advanced feature operation

9 T-Alarm: High signal indicates over-temperature; monitor for system safety

10 DC OK: High signal means module output is ON; use for status checking

NMP1K2-C#KEKH-00-PDF数据手册-参考资料