产品特点 FEATURES

1 Modular power supply design with 6 slots for NMP1K2, supporting up to 1200W total output power

2 Compliance with multiple safety standards including IEC 60601-1 (medical) and IEC 62368-1 (ITE)

3 Comprehensive protection functions: Overload Protection (OLP), Overvoltage Protection (OVP), Overtemperature Protection (OTP) (shutdown with auto-recovery or re-power on recovery)

4 Supports global and local ON/OFF control: Global via RC1 pin, local via RC2/RC3 pins for individual modules

5 Monitoring signals: DC OK (TTL level for output status), T-Alarm (over-temperature alarm)

6 Parallel operation capability with current sharing (CS pin connection required for load balance)

7 Auxiliary power outputs: 5V-AUX-P (2A for NMP1K2) and Vcc2 (5V/10mA for modules)

8 Remote customization: Voltage programming (PV pin) and current programming (PC pin, not for parallel use)

9 Specified mechanical mounting: Torque (12Kgf-cm front-end,10Kgf-cm terminals) and screw sizes

使用场景 APPLICATIONS

1 Industrial automation systems needing configurable DC power outputs

2 Medical equipment compliant with IEC 60601-1 (diagnostic devices, patient monitors)

3 Test and measurement setups requiring flexible power and real-time monitoring

4 Telecommunications/data communication equipment with modular power needs

5 Data centers/server racks for scalable, controllable power supply

6 Applications demanding reliable, configurable DC power with protection and monitoring

注意事项 PRECAUTIONS

1 Mounting: Use M4 screws (7-10 Kgf-cm torque) for front-end; M3.5 screws (max 10mm penetration) for terminals

2 Temperature derating: Below 12V output and -15°C to -30°C ambient, derate current to 90%

3 Parallel operation: Ensure module voltage difference <0.2V; connect CS pins; avoid PC function

4 Global ON/OFF: Install shorting connector (RC1 to GND-P) if not using global control

5 Remote control: Follow correct wiring for RC pins to avoid unintended output status

6 Over-temperature: Respond to T-Alarm signals promptly to prevent damage

7 Do not exceed module or total system load limits to avoid protection triggers

NMP1K2-C#HCHC-00-PDF数据手册-参考资料