产品特点 FEATURES

1 Modular design: 1200W total power capacity with 6 slots, supporting interchangeable output modules (5V/36A,12V/20A,24V/10A,48V/5A) for flexible voltage and current combinations

2 Wide input range: 90~264VAC or120~370VDC, 47~63Hz, adaptable to global power grids

3 High efficiency: Up to91% at full load (with H/K modules at nominal24V/48V)

4 Comprehensive protection: Overload (constant current limiting), overvoltage (shut down, re-power to recover), overtemperature (shut down, auto-recover when cooled)

5 Safety compliance: Meets ANSI/AAMI ES60601-1 Ed3.1, UL62368-1, TUV EN60601-1 Ed3.1, IEC62368-1 standards

6 Functional extensions: Remote sense (compensates voltage drop up to0.5V), remote ON/OFF (global/local control), DC OK signal (TTL level for output status), current sharing (for parallel operation), output voltage/current programming (via PV/PC pins)

7 Auxiliary power: Front-end provides5V/2A, module-level provides5V/10mA

使用场景 APPLICATIONS

1 Industrial automation: Powering PLCs, sensors, actuators with diverse voltage requirements

2 Medical equipment: Suitable for devices needing reliable, safety-compliant power (meets medical standards)

3 Telecommunications: Supporting network devices like routers, switches with multiple power needs

4 Test and measurement: Flexible power supply for lab instruments requiring varied output configurations

5 Data centers: Providing modular power to server racks or peripheral components

6 Industrial control panels: Tailored power distribution for different panel components

注意事项 PRECAUTIONS

1 Installation: Use M4 screws (7~10 Kgf-cm torque) for front-end mounting; M3.5 screws (10 Kgf-cm) for output terminals

2 Derating guidelines: When output voltage <12V and ambient temp is -15°C~-30°C, derate current to90% of rated value; adjust load based on ambient temp and input voltage per derating curves

3 Remote control: For global ON/OFF, ensure shorting connector (RC1 to GND-P) is installed if no external control is used; local ON/OFF requires RC2/RC3 pins (open=ON, short=OFF)

4 Parallel operation: Connect CS pins of modules, keep output voltage difference <0.2V, total power ≤1200W, use short/large-diameter wiring, avoid PC function in parallel mode

5 Safety: Disconnect AC input before maintenance; ensure proper grounding to meet leakage current limits (<400uA/264VAC)

6 Environment: Operate within -30°C~+70°C (derate above50°C) and20~90% RH (non-condensing)

NMP1K2-#EEHCK-00-PDF数据手册-参考资料