产品特点 FEATURES

1 Modular power supply from MW (Meanwell), model NMP1K2 (1200W max, 6 slots for output modules)

2 Wide input voltage range:90~264VAC /120~370VDC; frequency range:47~63Hz

3 High efficiency:Up to 91% (typical at full load with H/K modules at 24V/48V nominal voltage)

4 Safety compliance:Meets medical standards (2x MOPP between primary-secondary) and ITE standards (ANSI/AAMI ES60601-1 Ed.3.1, UL62368-1, TUV EN60601-1 Ed.3.1, etc.)

5 Output module options:Single output (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A) or dual output (NMD-240:two 30V/5A channels) with adjustable voltage ranges

6 Protection functions:Overload (constant current limiting), overvoltage (shut down, re-power to recover), overtemperature (shut down, auto recover after cooling)

7 Advanced functionalities:Remote on/off (global/local), remote sense (compensate up to0.5V wiring drop), output voltage/current programming (PV/PC), DC OK signal (TTL level for output status), current sharing (for parallel module operation)

8 Auxiliary power outputs:5V-AUX_P (2A for NMP1K2) and Vcc2 (5V/10mA for modules)

9 Mechanical specs:NMP1K2 size250×127×41mm (L×W×H), weight~2kg; output modules size118.5×37.9×18mm

使用场景 APPLICATIONS

1 Industrial automation:Powering PLCs, sensors, actuators with diverse voltage requirements

2 Medical equipment:Suitable for compliant medical devices like diagnostic tools and patient monitors (per safety standards)

3 Telecommunications:Powering network devices (routers, switches) needing stable modular power

4 Test & measurement:Flexible voltage outputs for testing electronic components

5 Data centers:Modular power for server racks or peripherals requiring multiple voltage levels

6 Laboratory setups:Reliable, adjustable DC power for experimental applications

注意事项 PRECAUTIONS

1 Installation:Ensure proper grounding; use recommended screws (M4 for front-end, M3.5 for modules) with specified torque (12Kgf-cm AC input,10Kgf-cm DC output)

2 Operating conditions:Follow derating curves—e.g., output voltage <12V at -15~-30°C requires90% current derating; reduce load at high ambient temps

3 Global ON/OFF:Assemble the shorting connector (RC1 to GND-P) for default output (unless external control is used)

4 Parallel operation:Connect CS pins of modules; voltage difference between modules <0.2V; avoid PC function in parallel; use short thick wiring

5 Remote control:Local ON/OFF—open RC2 (NMS) or RC2/RC3 (NMD) to turn on, short to turn off (refer to function manual)

6 Maintenance:Keep unit dust-free for heat dissipation; avoid condensing humidity

7 Safety:Do not touch live parts when powered; disconnect AC before servicing

NMP1K2-#CKECC-00-PDF数据手册-参考资料