产品特点 FEATURES

1 Modular design: NMP1K2 model has 6 slots, supporting up to1200W total power; compatible with single-output (NMS-240:5V/36A,12V/20A,24V/10A,48V/5A) and dual-output (NMD-240) modules for flexible voltage configuration.

2 Safety compliance: Meets medical (2x MOPP isolation) and ITE standards, suitable for medical and industrial scenarios.

3 High efficiency: Up to91% at full load (with H/K modules at24V/48V), reducing energy loss.

4 Comprehensive protections: Overload (constant current limiting), overvoltage (shutdown and auto-recover), overtemperature (auto-shutdown and recover after cooling).

5 Flexible control: Global/local ON/OFF, remote voltage (PV)/current (PC) programming, remote sense (compensates up to0.5V line drop), current sharing for parallel operation.

6 Monitoring signals: DC OK (TTL level for output status) and T-Alarm (overtemperature warning) for system monitoring.

7 Auxiliary power:5V/2A output for NMP1K2 to power control circuits.

8 Wide input range:90~264VAC/120~370VDC, adapting to various grid environments.

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic instruments, monitoring devices requiring safe and stable power (complies with medical standards).

2 Industrial automation: PLC systems, control panels, automated production lines needing multiple voltage outputs.

3 Test and measurement: Lab instruments and testing setups with adjustable, precise power needs.

4 Communication systems: Routers, switches needing stable power and remote monitoring.

5 Data centers: Server racks or modular setups requiring parallel operation and high power density.

6 Custom devices: Equipment with multiple voltage configurations (single/dual outputs) and flexible adjustments.

注意事项 PRECAUTIONS

1 Installation: Ensure proper grounding; use blank modules (BLANK-NMS240) for empty slots; follow mounting instructions (screw size, torque) to secure the unit.

2 Operation: Adhere to derating curves (reduce output current by10% for outputs <12V at -15~-30°C); do not exceed 1200W total power.

3 Control setup: Connect RC1 (CN32-PIN6) to GND-P (CN32-PIN3) for global output enable; use RC2/RC3 pins for local module ON/OFF.

4 Remote sense: Twist +S/-S lines to minimize interference; ensure voltage drop compensation ≤0.5V.

5 Parallel operation: Connect CS pins of modules to balance current; use short thick wires; total power should not exceed rated capacity.

6 Maintenance: Regularly inspect connections for looseness; keep the unit well-ventilated; do not modify internal components.

7 Safety: Disconnect power before maintenance; avoid overloading beyond rated capacity; follow electrical safety guidelines.

NMP1K2-#HHHHC-11-PDF数据手册-参考资料