产品特点 FEATURES

1 Brand: MW (明纬), Model: NMP1K2-#HC#EE-00, part of NMP series modular power supplies

2 Total power capacity:1200W, supports up to6 output modules (each up to240W)

3 Wide input voltage range:90~264VAC /120~370VDC, frequency range:47~63Hz

4 High power factor:PF>0.95 at230VAC full load, PF>0.98 at115VAC full load

5 High efficiency:Up to91% (full load with H/K module at nominal24V/48V)

6 Safety compliance:Meets medical (2x MOPP between primary and secondary) and ITE standards (ANSI/AAMI ES60601-1, UL62368-1, TUV EN60601-1, etc.)

7 Modular output options:Supports NMS-240 single-output modules (5V@36A,12V@20A,24V@10A,48V@5A) and NMD-240 dual-output modules (30V@5A each, combined240W)

8 Rich protection functions:Overload (constant current limiting), overvoltage (shut down and recover on re-power), overtemperature (shut down and auto-recover when temp drops)

9 Additional functions:Remote ON/OFF control (global and local), remote sense (compensates voltage drop up to0.5V), output voltage/current programming, DC OK signal (TTL level), current sharing (parallel operation), T-Alarm signal (overtemperature alert)

10 Auxiliary power output:+5V-AUX_P (2A for NMP1K2), Vcc2 (5V/10mA for modules)

使用场景 APPLICATIONS

1 Industrial automation systems:Powering PLCs, sensors, actuators and modular control components

2 Medical equipment:Suitable for devices requiring medical safety approvals (diagnostic instruments, patient monitoring systems)

3 Test and measurement setups:Providing stable adjustable power to DUTs with multiple voltage/current needs

4 Telecom and data communication:Powering network switches, routers and telecom modules

5 Data centers:Supporting server racks or modular IT equipment

6 Laboratory research:Used in R&D labs for experiments needing precise configurable power

7 Modular electronic systems:Flexible scalable power distribution for industrial IoT, embedded systems

注意事项 PRECAUTIONS

1 Installation:Ensure shorting connector (RC1 to GND-P) is installed for global ON/OFF; no output without it

2 Derating:When output voltage<12V and temp is -15~-30°C, derate current to90% of rated value; follow derating curves for other conditions

3 Remote sense:Use ±S pins to compensate load wiring voltage drop; proper connection required

4 Current sharing:For parallel NMS-240 modules, connect CS pins; voltage difference between modules <0.2V; total power ≤1200W

5 Temperature limits:Operating temp range -30~+70°C; derate at higher temps

6 Safety:Follow medical/ITE standards; avoid exceeding rated voltage/current

7 ON/OFF control:Local control via RC2 (NMS-240) or RC2/RC3 (NMD-240); open=ON, short=OFF

8 Overvoltage protection:Re-power to recover after overvoltage shutdown

NMP1K2-#HC#EE-00-PDF数据手册-参考资料