产品特点 FEATURES

1 Modular power supply design with 6 slots, supporting up to 1200W total output power (NMP1K2 model)

2 Multiple output module options (5V/36A,12V/20A,24V/10A,48V/5A) to meet diverse voltage and current requirements

3 Compliance with medical safety standards (2x MOPP isolation between primary and secondary) and ITE standards, suitable for medical and industrial applications

4 Wide input voltage range:90~264VAC or 120~370VDC, adapting to global power grids

5 High power factor (PF>0.95 at 230VAC full load) and high efficiency (up to 91% typical), reducing energy loss

6 Comprehensive protection functions: Overvoltage Protection (OVP), Overcurrent Protection (OCP), Overtemperature Protection (OTP), Overload Protection (OLP)

7 Remote control and monitoring capabilities: Remote on/off, remote sense (to compensate wiring voltage drop), DC OK signal (indicates output status), T-alarm (overtemperature alert)

8 Current sharing function for parallel operation of modules, enabling higher power output and redundancy

9 Auxiliary power outputs:5V/2A (front-end) and5V/10mA (per module) for control circuits

10 Wide operating temperature range:-30℃ to +70℃ (with derating as per guidelines)

使用场景 APPLICATIONS

1 Medical equipment: Diagnostic devices, patient monitoring systems, laboratory analyzers (due to medical safety compliance)

2 Industrial automation: PLC systems, motor drives, sensor networks, robotic equipment

3 Test and measurement: Electronic test benches, signal generators, oscilloscopes requiring multiple stable voltage outputs

4 Communication systems: Base stations, network switches, routers needing reliable power supply

5 Data centers: Server racks, storage systems, backup power solutions

6 Embedded systems: Custom electronic devices with diverse voltage requirements

7 Parallel power systems: High-power applications requiring redundant or scalable power solutions

注意事项 PRECAUTIONS

1 Ensure input voltage is within the specified range (90~264VAC/120~370VDC) before powering on to prevent damage

2 When using remote sense function, connect +S/-S pins correctly to the load terminals to avoid inaccurate voltage regulation

3 For parallel operation of modules: Connect CS pins of all modules, ensure output voltage difference between modules is ≤0.2V, and do not exceed total output power (1200W for NMP1K2)

4 Follow derating guidelines for high temperatures: At ambient temperatures above50℃, reduce output power as per the derating curve; for output voltages <12V at -15~-30℃, derate current to90% of rated value

5 Use the provided shorting connector (RC1 to GND-P) unless global ON/OFF control is intended; without it, the power supply will have no output

6 Adhere to mechanical specifications: Use recommended screw sizes (M4 for mounting) and torque (7~10 Kgf-cm) to avoid case deformation

7 Ensure proper grounding of the power supply to meet safety standards and reduce electromagnetic interference

8 Do not disassemble the power supply without professional authorization; internal components may carry high voltage even after power-off

9 For medical applications, verify compliance with local medical device regulations and standards before use

NMP1K2-#CE#CC-05-PDF数据手册-参考资料