产品特点 FEATURES

1 Modular power supply with 6 slots, supporting up to 1200W total output power

2 Wide input voltage range:90~264VAC /120~370VDC

3 High power factor:PF>0.95@230VAC full load; high efficiency up to91% (typ)

4 Compatible with multiple output modules:NMS-240 (single output:5V/36A,12V/20A,24V/10A,48V/5A) and NMD-240 (dual output:up to30V@5A each, combined 240W)

5 Compliance with safety standards:ANSI/AAMI ES60601-1 Ed.3.1,UL62368-1,TUV EN60601-1 Ed.3.1,EN62368-1,IEC60601-1 Ed.3.1,IEC62368-1

6 Multiple protection functions:overvoltage(OVP),overcurrent(OCP),overtemperature(OTP),overload(OLP)

7 Remote control & monitoring:global/local ON/OFF,DC OK signal,T-Alarm,remote sense,voltage/current programming(PV/PC)

8 Current sharing for parallel operation of NMS-240 modules

9 Auxiliary power outputs:5V-AUX_P(2A for NMP1K2),Vcc2(5V/10mA for modules)

使用场景 APPLICATIONS

1 Industrial automation systems requiring multiple DC voltage outputs

2 Medical devices compliant with IEC60601-1 standards(e.g.,diagnostic equipment,patient monitors)

3 Test & measurement setups and laboratory equipment

4 Telecommunication base stations and data center infrastructure

5 Industrial control panels and PLC systems

6 R&D prototypes and custom electronic systems

注意事项 PRECAUTIONS

1 Ensure proper grounding before operation; follow IEC/UL safety guidelines

2 Do not exceed total output power(1200W) or module power(240W)

3 Parallel operation:connect CS pins,ensure voltage difference<0.2V,use short/large wires; avoid PC function in parallel

4 Global control:install shorting connector between RC1 and GND-P if not using global ON/OFF

5 Remote sense:use twisted pairs for +S/-S lines

6 Temperature derating:reduce output current when ambient temp>50°C

7 Disconnect power before maintenance or module replacement

8 Do not use with damaged cables/casing

NMP1K2-#CC#CK-00-PDF数据手册-参考资料