产品特点 FEATURES

1 Modular configurable AC/DC power supply (PSU) designed for medical and industrial applications

2 Compact size: 5" × 3" × 1.61" (127mm ×76.2mm ×40.9mm) with 450W output power, weighing only 600g (high power density)

3 Low noise operation with -18dBA reduction compared to standard models, suitable for quiet environments

4 Intelligent fan control to optimize airflow for various load and temperature conditions

5 High efficiency up to 89% for energy saving

6 Supports up to 8 isolated output modules for flexible power distribution

7 Allows parallel and series connection of modules for scalable power output

8 Wide output voltage adjustment range and remote current/voltage programming for precise control

9 Accurate current sharing and droop current sharing for parallel units to ensure stable operation

10 Includes an isolated 5V 1A bias supply for auxiliary power needs

11 Compliant with IEC/UL60601-1 Ed3 (medical safety) and -1-2 Ed4 (EMC) standards

12 3-year manufacturer warranty for reliability assurance

使用场景 APPLICATIONS

1 Medical and diagnostic equipment (e.g., patient monitors, diagnostic scanners)

2 Test and measurement instruments (e.g., oscilloscopes, signal generators)

3 Robotics systems (industrial robots, collaborative robots)

4 Oil and gas field equipment (sensors, data loggers)

5 Telecommunications devices (network routers, communication hubs)

6 Laboratory and analysis tools (spectrometers, chromatographs)

7 Avionics equipment (aircraft on-board systems, ground support tools)

8 Display systems (digital signage, medical displays)

9 LED lighting applications (high-power LED arrays)

10 Retrofit of legacy power supply units (replacing outdated PSUs in existing equipment)

注意事项 PRECAUTIONS

1 Follow the specified airflow direction (cannot be reversed) during installation to ensure proper heat dissipation

2 Use the recommended screw torque settings for input modules (M4:0.5Nm), output modules (M3x0.5:0.3Nm), chassis (M3x0.5:0.3Nm), fan (M3x0.5:0.3Nm) to avoid damage or poor contact

3 Do not perform input-to-output isolation tests on assembled units as it may cause damage (refer to application note AP-002 for details)

4 Operate within the specified environmental ranges: temperature (-20°C to70°C), humidity (5%-95% non-condensing), altitude (up to3000m operational)

5 Ensure compliance with medical safety standards (IEC/UL60601-1 Ed3) when using in medical equipment

6 For unused output slots, use blanking plates as provided to maintain proper airflow and safety

7 Refer to the line rating and temperature derating graphs to determine maximum power output under different input voltages and ambient temperatures

8 Vox Power reserves the right to change product specifications without prior notice; always use the latest datasheet for reference

9 Do not exceed the maximum output current for each module to prevent overloading

NEVO+600ML-0100-DK000-PDF数据手册-参考资料