产品特点 FEATURES

1 Brand: SICK, Model: IMB18-12NPSVC0S, product type: inductive proximity sensor

2 Housing: Cylindrical threaded design (M18×1), made of stainless steel V2A (DIN 1.4305/AISI 303), housing length 65mm, thread length39mm

3 Sensing performance: Non-flush installation, sensing range Sr=12mm, safe sensing range Sa=9.72mm, switching frequency up to1000Hz

4 Connectivity: Male M12 4-pin connector with gold-plated contact pins, supports IO-Link v1.0 communication interface

5 Output: PNP type, normally open (NO) output, 3-wire electrical wiring

6 Protection level: IP68 and IP69K enclosure rating (dustproof, waterproof, high-pressure wash resistant), equipped with short-circuit, reverse polarity, and power-up pulse protection

7 Environmental adaptability: Ambient operating temperature range -40°C to +100°C, resistant to coolants and lubricants

8 Durability: Shock resistance (100g/2ms,500 cycles) and vibration resistance (150g/1 million cycles)

9 Special features: Visual adjustment indicator, suitable for difficult application conditions

使用场景 APPLICATIONS

1 Mobile machinery: Position detection in construction equipment, agricultural machinery, and other mobile industrial devices

2 Metal processing: Application in CNC machining centers, lathes, and grinding machines where coolants or lubricants are used

3 Heavy-duty industrial lines: Suitable for automotive assembly lines, packaging systems, and conveyor belts due to high protection level and anti-shock/vibration performance

4 Extreme environment: Can be used in cold storage (-40°C) or high-temperature processing areas (up to +100°C)

5 Automated material handling: Detecting metal parts in robotic arms, palletizing systems, and material transfer equipment

注意事项 PRECAUTIONS

1 Installation: Must adopt non-flush installation; follow the recommended tightening torque (60Nm for non-toothed side of the nut,90Nm for toothed side); ensure correct mounting distances as per the installation diagram

2 Operation: Do not exceed the input voltage range (10-30V DC); load current should not exceed200mA; avoid exposing the sensor to excessive mechanical stress

3 Maintenance: Clean the sensing face (plastic LCP) with non-abrasive cleaners; regularly check cable connections for damage; replace damaged connectors or cables promptly

4 Chemical use: Verify the sensor's resistance to cleaning agents (e.g., H2O2, CH2O2) before use; avoid contact with incompatible chemicals

5 Safety: Disconnect power before installation or maintenance; comply with local industrial safety regulations during operation

IMB18-12NPSVC0S-PDF数据手册-参考资料