产品特点 FEATURES

1 Constant current mode output with 700mA rated current, 69~93V constant current region and 65.1W rated power

2 Flicker-free design to eliminate eye strain and ensure comfortable lighting

3 PCB type design for flexible integration into various LED lighting systems

4 Built-in active PFC function to improve power factor (up to 0.95 at full load) and reduce harmonic distortion

5 Low power consumption: no-load power <0.5W (blank type), standby power <0.5W (DA-type)

6 Multiple protection functions: overload (hiccup mode, auto recovery), short circuit (hiccup mode, auto recovery), over-temperature (hiccup mode, auto recovery)

7 High efficiency up to 89% to minimize energy loss and operational costs

8 Wide input voltage range (180~295VAC) adapting to fluctuating grid conditions

9 Flexible dimming options: 2-in-1 dimming (0-10VDC or 10V PWM) for blank type, supporting dim-to-off

10 Long service life with MTBF up to 4316K hrs (Telcordia SR-332) and 3-year manufacturer warranty

11 Compliance with multiple safety standards: UL8750, CSA C22.2 No.205.13-12, ENEC BS EN61347-1, etc.

使用场景 APPLICATIONS

1 LED panel lighting in commercial buildings like offices, shopping malls and exhibition halls

2 LED flood lighting for indoor and semi-outdoor areas such as warehouses, parking lots and stadiums

3 Indoor LED lighting fixtures including downlights, track lights and strip lights in residential and commercial spaces

4 LED lighting projects requiring constant current drive and dimming functionality (retail stores, hotels, conference rooms)

5 Lighting systems in areas with fluctuating grid voltages (180~295VAC) needing stable performance

注意事项 PRECAUTIONS

1 Installation must be done by qualified personnel; disconnect power before wiring

2 Ensure input voltage matches the specified range (180~295VAC) to avoid damage

3 Install in well-ventilated areas to maintain working temperature (-20~+40°C)

4 Use compatible dimming signals (0-10VDC/PWM for blank type, DALI for DA-type) and follow wiring instructions

5 Do not exceed rated current/power to prevent overloading

6 Avoid exposure to sunlight, moisture or corrosive environments

7 Do not disassemble the driver yourself; contact manufacturer for repair if faulty

8 Follow terminal pin assignment (TB1 for input, TB2 for output/dimming) as per manual

IDPC-65-700-PDF数据手册-参考资料