产品特点 FEATURES

1 Stainless steel housing (AISI316L) and FDA-certified plastic front part, complying with food and beverage industry hygiene standards.

2 Ecolab certified and FDA compliant, resistant to common cleaning agents and alkaline solutions, suitable for high-pressure washdown processes.

3 IP69K and IP68 protection ratings, effectively resisting dust, water immersion, and high-temperature/high-pressure cleaning.

4 Extended operating temperature range from -40°C to +85°C, adapting to harsh environmental conditions.

5 M12 plug connection (IEC60947-5-2 compliant), ensuring secure and reliable wiring.

6 Built-in protection against reverse polarity, short circuit, and transient overload, enhancing device durability.

7 Laser engraved markings on the housing, maintaining permanent legibility after repeated cleaning.

8 Flush mounting design with a nominal sensing distance of 10mm, suitable for precise position detection.

9 CE and UL certified for hazardous locations (Class I Division 2), applicable in potentially explosive environments.

使用场景 APPLICATIONS

1 Food and beverage processing lines: Detecting metal containers, bottles, or packaging components during filling, capping, or labeling operations.

2 Pharmaceutical manufacturing: Monitoring metal parts in equipment to ensure compliance with strict hygiene and safety standards.

3 Automotive assembly lines: Identifying metal components (bolts, nuts, panels) for proper placement and assembly sequence checks.

4 Packaging industry: Ensuring the presence of metal packaging materials in automated packaging systems to prevent jams.

5 Harsh industrial environments: Used in outdoor or wet areas (e.g., car washes, agricultural machinery) with high-pressure cleaning or extreme temperatures.

6 Hazardous locations (Class I Division 2): Applications in petrochemical storage or processing facilities with flammable gases/vapors.

注意事项 PRECAUTIONS

1 Follow mounting guidelines: For flush mounting, refer to Picture1A; for non-flush, use Picture1B to maintain sensing accuracy.

2 When installing multiple sensors, keep the recommended spacing (Picture2A/B) to avoid mutual interference.

3 For opposite-mounted sensors, maintain a minimum distance of 6x the nominal sensing distance (60mm for this model) to prevent cross-sensing.

4 Use compatible M12 connector cables (e.g., CONB14NF series); refer to 'General Accessories' datasheets for more options.

5 Check reduction factors for non-ferrous metals (Picture4) as they may reduce effective sensing distance.

6 Ensure operating voltage is within the 10-36 VDC range to avoid device damage.

7 Do not exceed maximum output current (200mA at +85°C,10mA at -40°C) to prevent overload.

8 Avoid using the sensor in environments beyond its certified temperature or protection range.

ICS30SF10POM1-FB-PDF数据手册-参考资料