产品特点 FEATURES

1 E1-type approved by German Federal Motor Transport Authority, compliant with automotive standards for vehicle mounting

2 Extended sensing range (2x standard), reducing mechanical damage risk and machine downtime

3 Stainless steel housing (AISI304) for high durability, suitable for harsh environments

4 Wide power supply range (8-60V DC) to adapt to mobile equipment battery variations

5 Load dump protection against voltage peaks from alternator-battery disconnection

6 High EMC immunity: 200V/m radiated noise resistance,10V conducted RF noise resistance, preventing false actuation

7 IP67/IP68 (2m submersion 24h)/IP69K ratings, resistant to liquid cleaners, degreasers and harsh washing cycles

8 LED indicators: green (operational status), yellow (output status; blinking indicates short circuit or overload)

9 Milled section for wrench grip, easy to install; available with 2m PUR cable or M12 plug

10 Stable performance from -40°C to +85°C, with highly repeatable measurements

11 Customizable to specific OEM requests (e.g., special cables/connectors)

12 Multiple housing sizes: M12, M18, M30 with sensing distances from 4mm to 22mm

使用场景 APPLICATIONS

1 Position and presence sensing of metal objects on trucks, earth-moving equipment, agriculture machines, mobile cranes and buses

2 Outdoor mobile applications requiring resistance to extreme temperatures (-40°C to +85°C), high shock/vibration (20g vibration,100g shock)

3 Environments with high radio frequency noise (near vehicle electronics) needing reliable EMC performance

4 Mobile equipment where battery voltage fluctuations are common (8-60V DC compatibility)

5 Applications demanding long service life and minimal downtime (low mechanical damage risk from extended sensing range)

注意事项 PRECAUTIONS

1 Follow installation spacing guidelines: For flush sensors, ensure distance ≥3xSn from other metal objects; for non-flush sensors, maintain ≥3xSn distance and ≥3xd spacing from adjacent sensors

2 Operate within the specified temperature range (-40°C to +85°C) and power supply range (8-60V DC)

3 Do not exceed the maximum output current (200mA) to avoid damage

4 Monitor LED indicators: Blinking yellow LED indicates short circuit or overload; green LED off means sensor is non-operational

5 Use correct tightening torque: ICS12 (17.5Nm), ICS18 (27.5Nm), ICS30 (50Nm) to ensure proper mounting and IP rating

6 Ensure cable/plug connections are secure to maintain IP protection; use compatible connectors (M12 plug) and mounting brackets (AMB series, sold separately)

7 For multiple sensors installed together, maintain recommended spacing to prevent interference

8 Refer to the latest product specification sheet from Carlo Gavazzi for updated information before installation

ICS18L50N14NOM1E1-PDF数据手册-参考资料