产品特点 FEATURES

1 E1-type approved by German Federal Motor Transport Authority, compliant with automotive standards for vehicle mounting

2 Stainless steel AISI304 housing, durable against mechanical damage and corrosion

3 Extended sensing range (2x standard), reducing machine downtime from mechanical collisions

4 High EMC immunity: Resistant to radiated noise up to 200 V/m and conducted RF noise up to10 V, avoiding false actuation

5 Load dump protection against voltage peaks in onboard power supplies (e.g., battery disconnection from alternator)

6 Wide power supply range: 8-60 VDC, adapting to mobile equipment’s battery voltage fluctuations

7 IP67/IP68 (2m submersion for24h)/IP69K protection, resistant to high-pressure washing and liquid cleaners

8 Strong environmental resilience: Operating temperature -40°C to +85°C, storage temperature same; 100g shock resistance (11ms half-sine) and20g vibration resistance (10-3000Hz)

9 LED indicators: Green for operational status, yellow for output state (blinking indicates short circuit or overload)

10 Easy installation: Milled section for wrench grip; includes 2 fixing nuts and1 lock washer

11 M12 non-flush housing with 50mm thread length, PNP normally open output, M12 male plug connection

12 High precision: Advanced microcontroller ensures stable, repeatable measurements across temperature range

使用场景 APPLICATIONS

1 Position sensing for truck cargo door open/closed status to ensure transport safety

2 Attachment detection on earth-moving equipment (e.g., excavator bucket, loader arm) to prevent improper operation

3 Agricultural machine component position monitoring (e.g., plow depth adjustment, harvester cutting head alignment)

4 Load position sensing on mobile cranes to maintain operational safety and precision

5 Bus door status detection to ensure passenger safety before departure

6 Mobile utility vehicle tool attachment presence checks to avoid equipment damage

7 Vehicle washing system component position sensing, resistant to high-pressure cleaning and detergents

注意事项 PRECAUTIONS

1 Installation: Follow spacing guidelines—non-flush sensors require ≥3x nominal sensing distance from damping materials, ≥3x housing diameter from other sensors; opposite sensors need ≥6x nominal sensing distance

2 Tightening torque: Max17.5Nm for M12 housing to avoid damage

3 Operating conditions: Do not exceed -40°C to +85°C operating temperature; avoid environments beyond IP69K limits

4 Metal target: Rated sensing distance applies to Fe360 steel; adjust for other metals using correction factors

5 Electrical: Do not exceed max output current (200mA); ensure power supply voltage stays within 8-60VDC

6 Maintenance: Regularly check LED indicators—blinking yellow means short circuit/overload; green off indicates non-operational state

7 Accessories: Use compatible CARLO GAVAZZI mounting brackets (AMB series) and connectors (CONx series)

8 Compliance: Only mount on E1-approved vehicle applications as per automotive standards

ICS12L50N08POM1E1-PDF数据手册-参考资料