1 Brand: Carlo Gavazzi Computing Solutions; Model: ICB30SF10NOM1

2 Type: Inductive proximity switch with M30 nickel-plated brass housing

3 Sensing distance: 10mm (flush mounting style)

4 Electrical specifications: Rated voltage 10-36 VDC (ripple included); Max output current 200mA (at 50°C), 150mA (50-70°C)

5 Output configuration: Normally open (NO), NPN type open collector

6 Protection functions: Reverse polarity, short circuit, and transient protection

7 Housing materials: Nickel-plated brass body, grey thermoplastic polyester front cap

8 Protection rating: IP67 (dust-tight and water-resistant)

9 Indication: LED light for output ON status

10 Certifications: UL, CSA, CE approved; CSA certified for hazardous locations

11 Connection type: Plug-in for convenient installation and maintenance

1 Manufacturing assembly lines: Detect presence of metal components (e.g., bolts, panels) to ensure correct alignment during production

2 Conveyor systems: Count passing metal items or detect their position to trigger sorting/stopping actions

3 Packaging machinery: Verify presence of metal packaging parts (like cans, lids) before sealing or labeling

4 Material handling equipment: Check if metal loads are properly placed on forklifts or robotic arms

5 Automotive production lines: Position metal parts (e.g., engine components) for precise assembly steps

6 Industrial automation: Used in machine tools to detect tool presence or workpiece position to prevent collisions

1 Installation guidelines: For flush sensors in damping material, maintain ≥3xSn free zone (Sn=10mm); non-flush sensors need ≥2.5xSn

2 Adjacent sensor spacing: Flush sensors require ≥30mm (sensor diameter d=30mm) between each other; non-flush sensors need ≥120mm

3 Opposite installation: Keep ≥60mm distance between sensors installed opposite each other

4 Electrical safety: Operate within 10-36 VDC range; do not exceed max output current limits (200mA at 50°C,150mA above 50°C)

5 Target material: Sensing distance varies by target (e.g., steel Fe360 gives full effect; brass CuZn reduces it)

6 Environmental conditions: Avoid temps outside -25~+70°C (operating) or -40~+80°C (storage); ensure IP67 sealing is intact

7 Connection: Use compatible plug connectors (e.g., CONM13NF series) for proper fit and protection

8 Maintenance: Regularly check LED status and connections; clean front cap to avoid sensing interference

ICB30SF10NOM1-PDF数据手册-参考资料