1 Constant Voltage + Constant Current dual-mode output, adaptable to diverse LED load requirements

2 High energy efficiency up to 93%, minimizing power loss and heat emission

3 Fanless design, supporting wide operating case temperature range (-40℃ ~ +90℃ under free air convection)

4 IP67/IP65 ingress protection, dustproof and waterproof for indoor and outdoor applications

5 Multiple dimming options available (varies by model): 3-in-1 dimming (0~10VDC,10V PWM, resistance), smart timer dimming, DALI control

6 Metal housing with protective earth (PE) connection for enhanced safety and EMC performance

7 Low no-load/standby power consumption (<0.5W), meeting energy-saving standards

8 Long service life (>50000 hours at case temperature ≤70℃), reducing maintenance frequency

9 5-year manufacturer warranty for reliable use

10 3-wire input (ACL,ACN,PE) for stable power supply (specific to 3Y model)

1 Outdoor LED lighting: Street lamps, floodlights, landscape lighting (resistant to rain and dust)

2 Indoor industrial lighting: High bay/low bay LED lamps in factories and warehouses

3 Architectural lighting: Facade lighting, decorative lighting for buildings and public spaces

4 Commercial lighting: LED systems in shopping malls, parking lots, and retail stores

5 Hazardous locations: Class I Division 2 areas (occasional flammable gas/vapor presence, non-continuous hazardous environments)

1 Must connect the metal housing to protective earth (PE) for complete EMC compliance and safety

2 When using dimming functions, do not connect DIM- terminal to Vo- terminal to avoid damage

3 Dimming notes: Minimum dimming level is ~8%; output current is undefined for 0% < Iout <8%

4 Under low input voltage, derate output load according to static characteristic specifications

5 The driver is a component; final equipment manufacturers must re-qualify EMC for the complete system

6 For altitudes above 2000m, derate ambient temperature by3.5℃ per1000m (fanless model)

7 Follow official installation manual to maintain IP rating (proper wiring and sealing)

8 Comply with ErP regulations: Do not permanently connect to mains; install behind a switch

9 Refer to official website for detailed warranty terms

ELG-200-24-3Y-PDF数据手册-参考资料