产品特点 FEATURES

MW (Meanwell) ELG-100-C1400A waterproof LED driver power supply, designed for stable and efficient power supply to LED lighting systems. Key features include:

1 Rated power:100W, output current:1400mA

2 Output voltage range:35~72V (compatible with corresponding LED modules)

3 Wide input voltage range:AC100~305V / DC142~431VDC, suitable for global power grids

4 High protection level:IP67/IP65 dustproof and waterproof, applicable to indoor and outdoor installations

5 High conversion efficiency:Up to92%, reducing energy loss and heat generation

6 Wide operating temperature range:-40°C~+90°C, adaptable to extreme weather conditions

7 Multiple dimming options:Support3-in-1 dimming (0~10V DC signal, PWM signal, resistance adjustment), DALI interface (optional), and customizable smart timer dimming (up to14 hours of adaptive profiles)

8 Comprehensive safety protection:Over-temperature, over-voltage, short-circuit protection; isolation resistance≥100MΩ (500VDC), withstand voltage compliant (I/P-O/P:3.75KVAC, I/P-FG:2.0KVAC, O/P-FG:1.5KVAC)

9 Long lifespan:Typical lifespan≥50000 hours; high MTBF (3070.8K hours per Telcordia SR-332 standard)

10 Low standby power:<0.5W no-load power consumption, meeting energy-saving requirements

11 High power factor:PF≥0.92 (277VAC full load), PF≥0.95 (230VAC full load), PF≥0.97 (115VAC full load), minimizing grid harmonic interference

12 Durable mechanical design:Metal housing for heat dissipation and protection; dimensions:199×63×35.5mm (L×W×H), weight:0.85kg; easy to mount with4 screw holes

13 Strong vibration resistance:10~500Hz,5G vibration test compliant, suitable for installations in vibrating environments

使用场景 APPLICATIONS

The product is widely applicable to various LED lighting scenarios:

1 Outdoor LED lighting:Street lamps, harbor lights, bay lights, tunnel lights, garden landscape lights, etc.

2 Indoor LED lighting:Greenhouse lighting, industrial workshop lighting, commercial display lighting (where waterproof and dustproof are required)

3 Hazardous location lighting:Class I Division2 classified areas (applicable for HL-type models)

4 Smart lighting systems:Residential, commercial, or public area lighting that needs adjustable brightness or timed dimming

5 LED fixtures requiring stable power supply with wide voltage adaptability and harsh environment resistance

注意事项 PRECAUTIONS

Please follow the following precautions during installation and use:

1 Installation:Ensure the metal case is connected to protective earth (PE) for EMC performance and safety; refer to the official user manual for correct waterproof installation methods (IP67/IP65)

2 Derating:De-rate the load when operating under low input voltage or high ambient temperature; for altitudes above2000m, derate the operating temperature by3.5°C per1000m (fanless models)

3 Dimming operation:Do not connect DIM- to Vo-; the minimum dimming level is approximately8% (output current is undefined below this level)

4 Protection recovery:Over-temperature/over-voltage protection triggers shutdown—re-power the device to recover; short-circuit protection uses hiccup mode and auto-recovers after the fault is removed

5 Compliance:Follow ErP regulations—this power supply must be used behind a switch and not permanently connected to the mains

6 Smart timer dimming:Customizable profiles (up to14 hours) are available for Dxx-type models; D2 models need to be programmed under load conditions

7 Storage:Store in an environment with temperature-40~+80°C and humidity10~95% RH (non-condensing) when not in use

ELG-100-C1400A-PDF数据手册-参考资料