1 Brand: Carlo Gavazzi Computing Solutions

2 Type: Inductive proximity switch with non-flush mounting (15mm sensing distance)

3 Housing: Polycarbonate flat pack, IP67 protection (dust tight and water resistant)

4 Dimensions: 35×65×15mm (W×H×D)

5 Electrical specs: Rated voltage 12-36 VDC (ripple ≤10%), output current up to 200mA (PNP type, NO/NC available)

6 Indication: Red LED for power ON, yellow LED for output ON

7 Cable: 2m long, 4 wires (0.3mm²), grey PVC material (oil proof)

8 Installation: Easy to mount with two M4 screws (screw distance:31mm)

9 Certifications: CE, UL, CSA certified

10 Performance: Power ON delay <50ms, operating frequency up to500Hz, reverse polarity and short circuit protection

11 Ambient temperature: Operating (-25~+70°C), storage (-30~+80°C)

1 Conveyor belt systems: Detect presence/absence of metal parts (e.g., metal-framed boxes, metal components) moving on belts

2 Material handling equipment: Position sensing of metal items in assembly lines, packaging machines, or sorting systems

3 Industrial automation: Identify metal workpieces in robotic arm operations or machine tool processing

4 Packaging lines: Verify proper placement of metal containers before sealing or labeling

1 Installation tips:

2 Follow correct wiring diagrams

3 Avoid interference: Separate switch cables from power cables by ≥20cm (parallel) or cross at90°

4 Do not use as mechanical stop; protect sensing face from impact

5 Relieve cable strain: Use loops when mounting on mobile carriers (do not pull cables directly)

6 Usage guidelines:

7 Operate within rated voltage (12-36VDC) and current (≤200mA)

8 Do not exceed ambient temperature ranges

9 Keep sensing face clean to ensure detection accuracy

10 Maintenance:

11 Regularly inspect cable/housing for damage

12 Replace worn parts (e.g., cables) to maintain reliability

EI5515PPAP-PDF数据手册-参考资料