1 AC 2-wire proximity sensor with shielded M30 × P1.5 thread design

2 Sensing distance: 10mm ±10% (detects ferrous metals; sensing distance reduces for non-ferrous metals)

3 Oil-resistant performance: Standard cable made of oil-resistant PVC; sensing surface uses cutting oil-resistant material

4 Mutual interference prevention: Different frequency models available to avoid cross-interference between multiple sensors

5 Environmental protection: IP67 rating (dust-tight and water-resistant); operating temperature range -25°C to 70°C (no icing or condensation)

6 Cable protection: Built-in cable protector to reduce disconnection risks

7 Status indicator: Red operation indicator to display working state

8 Mounting accessories: Two clamping nuts and one toothed washer included for secure installation

9 Load range: Supports AC load current of 5mA to 300mA

10 Cable extension: Allowable extension up to 200m with separate metal conduit

1 Industrial assembly lines: Detect presence of metal parts (e.g., bolts, nuts, metal components) during assembly

2 Packaging machinery: Check if metal inserts or packaging materials are correctly placed before sealing

3 Conveyor systems: Sense position of metal workpieces on conveyors for sorting or precise stopping

4 Machine tools: Detect tool position or metal workpiece presence to trigger machining operations

5 Material handling: Verify proper placement of metal loads on AGVs or forklifts

6 Automotive production: Align metal body parts or detect metal fasteners in manufacturing lines

7 Electrical equipment manufacturing: Ensure metal components are installed correctly in motors or switchgear

1 Mounting clearance: Follow recommended distances from surrounding metal to avoid performance degradation (refer to product manual for exact values)

2 Tightening torque: Do not over-tighten clamping nuts; adhere to specified torque limits (e.g., M30 nut torque guidelines)

3 Mutual interference: Maintain minimum distances between sensors; use different frequency models if close mounting is required

4 Load safety: Avoid short-circuiting the load; ensure load current stays within 5mA to 300mA

5 Cable care: Do not pull or twist the cable excessively; use the protector to prevent damage

6 Environmental limits: Do not operate in areas with icing, condensation, or temperatures outside -25°C to 70°C

7 PLC compatibility: Check residual voltage, leakage current, and load current against PLC input requirements before connection

8 Maintenance: Regularly clean the sensing surface to remove oil, dust, or debris for accurate detection

E2E-X10Y2-US-PDF数据手册-参考资料