产品特点 FEATURES

1 Brand: OMRON (欧姆龙), model: D3V-11G-2C4-K, type: miniature basic switch with external hinge lever

2 Electrical rating: 11(3)A at 250VAC, suitable for medium-load applications

3 Contact design: Self-cleaning contacts to maintain reliable connection; contact gap of 0.5mm (G gap) for enhanced safety

4 Actuator: Hinge lever (external, near plunger position), allowing easy operation via mechanical displacement

5 Terminals: Quick-connect terminals (#250 size), enabling fast and secure wiring without soldering

6 Mechanical specs: Max operating force of 0.98N (100gf); mounting hole size of 2.9mm for flexible installation

7 Durability: Mechanical durability up to 10 million operations min; electrical durability varies by load (e.g.,50k operations min for standard resistive loads)

8 Safety & compliance: RoHS compliant; meets UL/cUL (UL61058-1), VDE (EN61058-1) safety standards; degree of protection IEC IP40, class I against electric shock

9 Environmental resistance: Operating temperature range of -25°C to +105°C (no icing/condensation); insulation resistance ≥100MΩ (500VDC), contact resistance ≤50mΩ (initial)

使用场景 APPLICATIONS

1 Industrial machinery: Position detection for conveyor belt limits, packaging machine part alignment, textile equipment thread break sensors

2 Home appliances: Door interlock switches for washing machines, refrigerator door open/close indicators, microwave oven safety locks

3 Automotive: Window lift end-position sensing, seat adjustment limit switches, interior panel control actuators

4 Office equipment: Paper tray position detection in printers, copier paper jam sensors, scanner lid closure switches

5 Medical devices: Diagnostic equipment moving part position sensing, patient monitor enclosure safety interlocks

6 HVAC systems: Air conditioner filter change indicator switches, heater safety door interlocks, damper position controls

注意事项 PRECAUTIONS

1 Handling: Avoid dropping the switch as internal components are sensitive to impact (designed for small loads)

2 Mounting: Use two M3 screws with torque between0.39-0.59 N·m (4-6 kgf·cm); for lever switches with ≤0.49N operating force, mount to prevent actuator weight from applying unnecessary load (to avoid reset failure)

3 Insulation: Ensure minimum insulation thickness of1.1mm and clearance of1.9mm (per EN61058-1); if not feasible, use an insulation barrier or separator to meet safety requirements

4 Load application: Do not use this model for micro-load circuits (use D3V-01 series instead); if inrush current is present in the circuit, add a contact protection circuit to reduce wear and extend lifespan

5 Environmental conditions: Operate within the specified temperature (-25°C to +105°C) and humidity (≤85% at5-35°C) ranges; avoid icing or condensation on the switch

D3V-11G-2C4-K-PDF数据手册-参考资料