1 Split core design for easy installation without interrupting the current-carrying circuit

2 Compatible with 35mm DIN Rail or Panel Mount for flexible placement in control systems

3 Self-powered operation, eliminating the need for external power supply

4 Provides 0-10 VDC output proportional to the average RMS value of input AC current (0-70 AAC range)

5 Basic measurement accuracy of 0.5% ensures reliable data for monitoring and control

6 Linear performance across 10% to 100% of full scale for consistent results

7 Thermal drift of 500 PPM/°C maintains stability under varying temperature conditions

8 Supports frequency range of 50Hz to 400Hz, suitable for diverse AC electrical systems

9 Regulatory compliance: Recognized to UL 61010-1, CAN/CSA-C22.2 No.61010-1-2004; meets IEC 61010-1 and EN 61010-1 standards

10 Low-cost solution with high-value features including compatibility with external current transformers

11 Connection diagram printed directly on the case for quick and error-free wiring

12 Insulation voltage rating of 2500 VDC ensures safe operation in industrial environments

1 Multi-point current sensing and control in industrial automation panels

2 Remote monitoring and control of current loads in distributed equipment systems

3 Motor fault detection by tracking abnormal current fluctuations

4 Heating element condition monitoring to prevent overheating and ensure energy efficiency

5 Lighting system current management for energy conservation and maintenance scheduling

6 Equipment health monitoring for pumps, fans, and other industrial machinery

7 Energy management systems in commercial buildings to track electrical consumption

8 Building automation setups for HVAC and electrical load monitoring

9 Safety systems to detect overcurrent conditions in critical production equipment

10 Industrial process control to maintain optimal current levels for consistent output

1 Installation must adhere to local electrical safety codes and regulations

2 Mounting torque for connections should not exceed 3.0 inch-lbs (0.4Nm) to avoid damage

3 Operating temperature range: 0°C to 60°C; avoid exposure to extreme heat or cold

4 Altitude limit: Maximum 2000 meters above sea level; performance may degrade beyond this

5 Output load resistance must be at least 1MΩ to ensure accurate signal transmission

6 Clean only with a water-dampened cloth; do not use harsh chemicals or abrasive tools

7 A switch or circuit breaker must be installed nearby as a disconnect device for safe maintenance

8 Split core design allows installation without breaking the existing circuit, saving time and effort

9 Vibration resistance tested to IEC 60068-2-6:1995, suitable for moderate industrial vibration environments

10 Pollution degree 2: Install in areas protected from heavy dust or moisture

11 Do not exceed the input current range (0-70 AAC) to prevent transducer damage

12 Insulation voltage rating of 2500 VDC ensures safe isolation between input and output circuits

CR4211S-70-PDF数据手册-参考资料