产品特点 FEATURES

1 Compact open-frame design: Dimensions 50.8mm×101.6mm×36.1mm (2in×4in×1.4in), power density of 18W/in³, weight 185g (6.5oz)

2 Universal AC input: 90-264VAC range, 47-63Hz frequency; active power factor correction with typical 0.95 power factor

3 Output parameters: 12V DC output (adjustable ±5% to 11.4-12.6V), maximum output current 16.7A (200W); standby output not accessible for Z03C version

4 Efficiency and certifications: 80 PLUS Gold certified for high efficiency; compliant with RoHS II (EU Directive 2011/65/EU) and REACH (EC No 1907/2006); UL/cUL approved to UL/CSA62368-1, TUV EN62368-1, CE Mark (LVD), CB Report available; manufactured in ISO9001/14001 certified facilities

5 Thermal performance: Full load capability at 50°C with 1m/s (200LFM) airflow; derating required at higher temperatures or lower airflows; for Z03C version in sealed enclosure with thermal pad to enclosure, maximum output 110W at 55°C ambient (outside enclosure); natural convection cooling limits max load to 100W

6 Protection features: Non-latching output overcurrent protection, overtemperature protection (shuts down and restarts after cooling), output overvoltage protection (hiccup mode); up to 12ms holdup time

7 Paralleling: Up to four units can be paralleled for higher current with current sharing; use ORing diodes for redundancy

8 EMI compliance: Conducted EMI meets CISPR32 (EN55032) and FCC Class A requirements

9 Z03C-specific: No remote on/off control; signal connector HD3 not present

使用场景 APPLICATIONS

1 Telecommunications equipment: Suitable for telecom base stations, network switches, and communication routers requiring stable power supply

2 Embedded computing systems: Ideal for compact embedded devices, industrial PCs, single-board computers, and embedded controllers

3 Storage systems: Applicable to data storage servers, RAID arrays, network-attached storage (NAS) devices, and storage area networks (SAN)

4 Industrial equipment: Used in industrial control systems, automation machinery, test instruments, and measurement devices

5 Sealed enclosure applications: With thermal pad conduction to enclosure, suitable for enclosed industrial devices (Z03C version with derated output)

6 Harsh environment use: Can operate in temperatures ranging from -40°C to 70°C (with appropriate derating)

注意事项 PRECAUTIONS

1 Installation: This power supply is not a standalone product; it must be integrated into other equipment by professional installers to ensure compliance with end-application safety and performance requirements

2 Thermal management: Ensure sufficient cooling (airflow or conduction) to prevent overtemperature protection triggering. For natural convection, limit load to 100W

3 Paralleling: When paralleling up to four units, use ORing diodes for redundancy; remote sense points should be common if remote sense is used

4 Low-temperature startup: At -40°C startup, limit load to 80% of maximum (160W) to ensure normal operation

5 Reliability: Avoid sustained operation at 85°C ambient with input voltage above 230VAC and near-max load, as this may reduce product lifespan

6 Protection mechanisms: Overcurrent protection is non-latching (resumes after fault removal); overvoltage protection uses hiccup mode (restarts after fault is cleared); overtemperature protection shuts down the unit and restarts once cooled

7 Connector selection: Use compatible mating connectors for AC input (Tyco5-1376382-1 or equivalent) and DC output (Molex39-28-1043 or equivalent); Z03C version does not have signal connector HD3

CLP0212FPEX5Z03C-PDF数据手册-参考资料