1 Insulation type DC-DC converter with 6W maximum output power

2 Input voltage:24V DC (nominal), output voltage:12V DC (nominal)

3 Horizontally-mounted SMD type (model suffix SR)

4 Mounting area reduced by half compared to existing products

5 No tantalum capacitor or aluminum electrolytic capacitor used, improving long-term reliability

6 Integrated remote On/Off function for convenient power control

7 5-side metal-shielded design to minimize electromagnetic interference (low noise)

8 Lightweight construction without resin filling

9 Conforms to RoHS directive

10 Output voltage accuracy of ±3% (for single output models ≤10W)

11 Overcurrent protection (auto-reset when the fault cause is eliminated)

12 Insulation voltage:500V AC (between input/output, input/ground, output/ground) for 1 minute

13 Maximum ripple and noise:50mVp-p

14 Approved by UL62368-1, CSA62368-1, EN62368-1 safety standards

1 Industrial control systems requiring isolated DC-DC conversion

2 Telecom and communication equipment modules

3 Consumer electronics with 24V input needing stable 12V output

4 Embedded systems and PCB-mounted power supply units

5 Sensors, actuators, and other low-power devices in industrial environments

6 Applications where noise reduction is critical (due to 5-side metal shielding)

1 Do not operate under output short-circuit or overload conditions for more than 10 seconds

2 For ambient temperatures outside the range of -40°C to +85°C, derate the output power according to the derating curve

3 Use in non-condensing environments (maximum humidity:95% at 40°C)

4 Follow the recommended mounting board measurements (as per the outline drawing for SMD type) to ensure proper installation

5 Do not exceed the input voltage range (refer to the latest product specifications for exact values)

6 Repeated overcurrent events may damage the unit, even with auto-reset protection

7 Utilize the remote On/Off function strictly according to the terminal connection guidelines

8 Note that all specifications are subject to change without prior notice; confirm the latest specs before application

CC6-2412SR-E-PDF数据手册-参考资料