1 Wide 2:1 input voltage range (36-72 VDC for nominal 48V input)

2 24-pin DIP package with metal enclosure for enhanced durability

3 High conversion efficiency up to 80% to minimize power loss

4 Broad operating temperature range: -40°C to +85°C (with derating required above 71°C)

5 Input/output isolation voltage of 3500 VDC (HS35 model variant)

6 Pin-compatible design with multiple DC-DC converter manufacturers for easy replacement

7 Continuous short circuit protection with auto-recovery function to ensure system safety

8 RoHS-compliant to meet environmental standards

9 Precise voltage accuracy of ±1% for stable output performance

10 Low line and load regulation (±0.5% each) to maintain output stability under varying conditions

11 Low output ripple and noise (≤60 mV p-p with 100uF output capacitor)

12 Long mean time between failures (MTBF): >1,000,000 hours (per MIL-HDBK-217F standard)

1 Industrial control systems: Powering sensors, actuators, and control modules in manufacturing lines

2 Telecommunications equipment: Providing stable voltage to transceivers and base station components

3 Instrumentation and measurement devices: Ensuring accurate power supply for precision meters and analytical tools

4 Embedded systems: Powering microcontrollers, FPGAs, and digital components in embedded applications

5 Automation devices: Used in PLCs (Programmable Logic Controllers) and DCS (Distributed Control Systems)

6 Railway and transportation systems: Powering on-board electronic devices requiring stable DC voltage

7 Renewable energy systems: Converting voltage from solar panels or batteries to power auxiliary devices

1 Ensure input voltage stays within the specified range (36-72 VDC) to avoid device damage

2 Do not exceed the absolute maximum input voltage (0.7-80 VDC for 48V nominal input)

3 Follow the derating curve for high ambient temperatures: Reduce output power when operating above 71°C

4 Connect a 100uF capacitor at the output to minimize ripple and noise as recommended

5 Handle carefully to avoid bending or damaging pins during installation

6 Ensure proper heat dissipation (free air convection or additional cooling) for full-load operation

7 Comply with IEC 60950-1 safety standards during installation and use

8 Do not operate outside the specified temperature range (-40°C to +85°C)

AM5T-4815DH35-VZ-PDF数据手册-参考资料