1 Brand: Aimtec, model: AM2DG-12158.7DH30-NZ, series: AM2DG-NZ dual-output DC-DC converter with 2.1W power rating

2 Input parameters: Voltage range of 11.6~12.4V DC, full load current of 223mA

3 Output parameters: Dual outputs of +15V (14~16V) and -8.7V (-7~-10V), with maximum currents of +100mA and -80mA respectively

4 Key electrical features: Efficiency up to 80%, ultra-low isolation capacitance, continuous short circuit protection

5 Environmental adaptability: Extended operating temperature range of -40°C to +105°C

6 Compatibility and certifications: SIP7 package compatible with multiple manufacturers' pinouts, RoHS compliant and UL certified

7 Isolation: Tested I/O voltage >1000VAC (60sec, <1mA condition)

1 Industrial automation: Powering control modules, sensors, or actuators in PLC systems or factory automation setups

2 Embedded systems: Providing stable dual voltage rails for microcontrollers, DSPs, or FPGA-based designs

3 Instrumentation: Supporting precision measurement devices like oscilloscopes, multimeters, or data loggers

4 Telecom equipment: Used in line cards, transceivers, or base station components requiring isolated power

5 Automotive electronics: Suitable for vehicle-mounted systems (e.g., navigation, telematics) that withstand extreme temperatures

6 Medical devices: Low-power medical equipment (e.g., patient monitors, diagnostic tools) needing input-output isolation

7 Portable electronics: Battery-powered devices like handheld meters or wireless sensors that benefit from efficient power conversion

1 Operational limits: Do not operate beyond the input voltage range (11.6~12.4V DC) or temperature range (-40°C~+105°C)

2 Derating requirement: Reduce output power when operating above 85°C as per the derating curve provided in the spec sheet

3 Short circuit handling: While continuous short circuit protection is available, avoid prolonged short circuits to prevent component degradation

4 Capacitive load: Ensure the connected capacitive load does not exceed the maximum of 220uF

5 Soldering guidelines: Use soldering temperature ≤300°C at 1.5mm from the case for no more than 10 seconds

6 EMI compliance: For Class B EMI performance, implement the recommended filter circuits (inductors and capacitors) as shown in the spec sheet

7 Safety: Follow isolation safety standards; do not exceed the tested I/O voltage limit during operation

8 Storage: Keep in a dry place with humidity ≤95% RH (non-condensing) and temperature within -40°C~+105°C when not in use

AM2DG-12158.7DH30-NZ-PDF数据手册-参考资料