产品特点 FEATURES

1 Wide input voltage range of 18-75VDC (4:1 ratio) to adapt to diverse power sources

2 Low no-load power consumption for energy efficiency

3 High conversion efficiency up to 91% to reduce heat generation

4 2250VDC input-output isolation for safety and noise suppression

5 Remote ON/OFF control for flexible power management

6 Industry standard 1/4 brick form factor for easy integration

7 Overcurrent, overvoltage, overtemperature and continuous short circuit protection

8 Complies with EN50121-3-2 and IEC 62368-1 safety standards

9 UL listed and RoHS compliant for global market access

10 Supports up to 2000uF maximum capacitive load

使用场景 APPLICATIONS

1 Industrial automation systems: Powering PLCs, sensors and actuators in harsh environments

2 Telecom and networking equipment: Stable power supply for routers, switches and base station components

3 Embedded systems: Used in medical devices, test instruments and control panels

4 Railway and transportation systems: Rugged design suitable for temperature fluctuations (-40 to +85°C)

5 Data centers: Efficient power conversion for server peripherals

6 Renewable energy systems: Adapting variable voltages from solar panels or wind turbines

注意事项 PRECAUTIONS

1 Operating temperature range: -40°C to +85°C; refer to derating curves for output power adjustment at high temperatures

2 Input voltage should not exceed 80VDC (absolute maximum) to prevent damage

3 Sense pin usage: If not using sense function, connect +Sense to +Vout and -Sense to -Vout with short traces; if using, use twisted pair/shielded wire and ensure voltage drop <0.3VDC

4 Output trimming: Refer to the trimming table for resistor values (e.g., trim down 15VDC by 2% with 965.116kΩ resistor)

5 Mounting: Follow dimension specs (24.34x61.80x12.70mm for standard case; optional aluminum case/heatsink)

6 Safety: Comply with local electrical codes and standards during installation

7 Storage temperature: -55°C to +125°C; avoid humidity >95% RH

AM150QB-4815SH22-NZ-M-PDF数据手册-参考资料