产品特点 FEATURES

Ultra-wide 4:1 input voltage range (9-36V DC for 24V input models) to adapt to fluctuating power supply conditions

1 Dual output design providing ±15V DC with a maximum current of ±330mA per output, ideal for applications requiring balanced dual voltages

2 High efficiency up to 87% to minimize power loss and reduce heat generation

3 Low standby power consumption of 0.12W, contributing to energy efficiency in idle states

4 Built-in protection mechanisms: Over voltage protection, over current protection, and continuous short circuit protection (compliant with EN55032 Class A without external components)

5 Remote on/off control function for flexible power management in system integration

6 Input/output isolation of 1500VDC, ensuring operational safety and reducing electrical interference

7 Wide operating temperature range of -40°C to +85°C, suitable for harsh industrial and outdoor environments

8 Compliant with international standards including EN60204-1 (industrial machinery), EN62368 (AV/IT safety), EN50155 (railway applications), and RoHS

9 Compact size (32.00×20.0×10.8mm) and aluminum alloy case, perfect for space-constrained installations

使用场景 APPLICATIONS

Industrial automation systems: Powering sensors, actuators, or control modules that require stable ±15V dual voltages and wide input range

1 Railway and transportation equipment: Suitable for on-board devices like communication systems, monitoring sensors, or control units (compliant with EN50155)

2 Telecommunication infrastructure: Providing power to network equipment, signal processors, or transceivers that need isolated dual outputs

3 Outdoor and remote monitoring systems: Withstanding extreme temperatures (-40°C to +85°C) for weather stations, environmental sensors, or IoT gateways

4 Test and measurement instruments: Stable output and isolation ensure accurate readings in laboratory equipment or field testers

5 Embedded systems: Compact form factor fits into small devices like embedded controllers or portable electronics

6 Renewable energy applications: Adapting to variable input voltages from solar panels or battery systems

注意事项 PRECAUTIONS

Ensure input voltage is within the specified range (9-36V DC) to prevent damage to the converter

1 Do not exceed the maximum output current (±330mA per output) or maximum capacitive load (330µF) to maintain stable operation

2 Follow the pinout diagram (bottom view) for correct wiring of input, output, and remote control pins to avoid reverse polarity or short circuits

3 For EMC compliance, refer to the recommended circuit diagrams (Part A for EMS, Part B for EMI) in the datasheet to add necessary external components (filters, capacitors) if required

4 Operate within the safe temperature range (-40°C to +85°C); derate performance at temperatures above 65°C (refer to the derating curve)

5 Ensure proper heat dissipation: Avoid blocking the aluminum alloy case's ventilation or mounting in enclosed spaces without cooling

6 Use remote on/off control correctly: The control pin (pin1) requires a low signal (0...1.2Vdc) for OFF and high (3.5...12Vdc) or short to input negative for ON

7 Dispose of the converter according to local electronic waste regulations; do not discard in regular trash

8 For safety, ensure the device is disconnected from power before wiring or maintenance

AM10TW-2415D-NZ-PDF数据手册-参考资料