产品特点 FEATURES

1 Bolt-on cable clamp designed for bundled conductors, compatible with Anderson Power SB50 series connectors

2 Accommodates bundled conductors with outer diameter (OD) ranging from 0.320 to 0.450 inches (8.13 to 11.43 mm)

3 Securely holds cables to prevent accidental strain or pulls from dislodging wires or contacts from the connector housing

4 Enhances mechanical stability of power connections, ideal for high-vibration or frequent-movement applications

5 Recommended for use with soldered terminated wires to maintain connection integrity

使用场景 APPLICATIONS

1 Industrial DC power distribution systems (e.g., battery charging stations, electric vehicle power transfer) using SB50 connectors

2 Material handling equipment (forklifts, pallet jacks) where bundled power cables need secure fastening

3 Renewable energy installations (solar panel arrays, wind turbine auxiliary systems) requiring stable power connections

4 Manufacturing floor machinery and warehouse equipment with bundled power lines

5 Harsh environment applications (when paired with SB50 environmental boots) to protect connections from external elements

注意事项 PRECAUTIONS

1 Ensure the bundled conductor's OD is within the specified range (0.320-0.450 inches /8.13-11.43 mm) to avoid insecure hold or damage

2 Apply proper torque during installation (follow Anderson Power's recommended values, typically around 12 in-lbs/1.4 Nm for similar bolt-on clamps) to prevent over-tightening or under-tightening

3 Use exclusively with bundled conductors; not suitable for single conductor applications

4 Pair with SB50 environmental boots for outdoor or dusty environments to add water/dust protection

5 For soldered terminated wires only, as recommended, to ensure connection stability under strain

5905-BK-PDF数据手册-参考资料